garage stuff
#1
Junior Member
Posts like a V-Tak
Thread Starter
Join Date: Mar 2007
Location: michigan
Posts: 25
Likes: 0
Received 0 Likes
on
0 Posts
garage stuff
I have been contacted about my garage and how did I do it for so cheap. I am a MacGyver and a cheapskate. I have learned to see things that aren't there and make them work. For example- my biggest concern in my shop was dusty dirty tools all the time. How do you keep your tools clean in a shop where you cut wood, weld, grind, and just make a mess with every project? Put the tools in a box or cabinet. What is a cabinet- a box that you can open/close easily. I go to garage sales and pick up bi fold doors and hardware for a song. 6 sets of doors in my shop cost 5.00 a set- that included the hardware. Now, I needed a box to fit the doors. 7 sheets of12.00 Particle board cut to fit using a skill saw, some grey paint and some drywall screws, and I had-- a garden tool cabinet, a tool garage, an auto supplies cabinet, a tall tool locker (for my roller stand, box clamps, and all my levels and squares)and the urge to do more. I went to a local recycler and bought drawer hardware for 2.00 a set. I purchased 6 more sheets of wood- this time MDF - and 2 more particle board ( for the work top). I laid out what i wanted to do and started cutting cabinet sides then tops and bottoms. I set 2 2x4 treated 16 foot pieces on the floor ( to protect against possible water damage) leveled them and started to assemble the cabinets. Since I made all the cabinets divisible by 2 foot, the drawers were easy. I just made a bunch. Since I am in the heating field I have access to sheet metal. I bought 3 sheets of 26 gauge sheet metal and had it bent/broken to my dimensions and wa la! I had an indestructable work top. I also have 3 roll-around caddies that roll under the work bench and have Metal tops so I can weld or fiberglass without worrying. The rollers- bought at garge sales 25 cents each- cost at lumber yard 6.00 each. There was no need to go out and buy expensive drawer hard ware at 6.00 a pop when I could buy the same hardware used for 1/4 of the price. It was harder to decide on what i wanted to do than to actually build the cabinets and stuff.I am far from done with it
garageft.jpg
garagert.jpg
garagelt.jpg
Here are some handy ideas that may help you with your garage.
http://www.rd.com/familyhandyman/content/17577/
http://www.rd.com/familyhandyman/content/18207/
http://www.rd.com/familyhandyman/content/18265
If you would like more ideas or to see more of my MacGyverisms, just ask.
Brian
garageft.jpg
garagert.jpg
garagelt.jpg
Here are some handy ideas that may help you with your garage.
http://www.rd.com/familyhandyman/content/17577/
http://www.rd.com/familyhandyman/content/18207/
http://www.rd.com/familyhandyman/content/18265
If you would like more ideas or to see more of my MacGyverisms, just ask.
Brian
#2
Junior Member
Posts like a V-Tak
Thread Starter
Join Date: Mar 2007
Location: michigan
Posts: 25
Likes: 0
Received 0 Likes
on
0 Posts
garage stuff
Oh teah, I forgot to say that I have a small refrigerator for libations, and a microwave to keep my coffee hot and the popcorn at the ready.
#3
Member
Posts like a V-Tak
Join Date: Jun 2005
Location: Mcallen TX
Posts: 66
Likes: 0
Received 0 Likes
on
0 Posts
Thats a pretty cool setup there. I think most of us here would kill for a garage like that. That being said, most of the time I have most of my tools in the truck of my car just incase I need something where ever I may be. Its helped my out more than once...
Sam
Sam
#4
Pics aren't working for me. Try going to www.photobucket.com and setting up a free account instead of geocities. Do you have a small bandwidth limit there?
#5
Senior Member
True Car Nut
Join Date: Jan 2006
Location: NEBF:06,07 | NYBF:06,07 | ONBF:06,07 | CNBF:06 & more............
Posts: 8,029
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by dillcc
Pics aren't working for me. Try going to www.photobucket.com and setting up a free account instead of geocities. Do you have a small bandwidth limit there?
Try right clicking them and choose View. then refresh the page
#8
Junior Member
Posts like a V-Tak
Thread Starter
Join Date: Mar 2007
Location: michigan
Posts: 25
Likes: 0
Received 0 Likes
on
0 Posts