Looking for tips and websites ! ! !
#1
Junior Member
Posts like a Ricer Type-R
Thread Starter
Join Date: Nov 2004
Location: UTAH, USA
Posts: 14
Likes: 0
Received 0 Likes
on
0 Posts
Looking for tips and websites ! ! !
I´m a new member and I want some tips on how to boost my car. I´m looking for spark plug wires, and a supercharge pulley 2.2" for my 1996 SSEi. But I can´t find any places who sell them. If any body knows where can I order this stuff online please contact me.
#2
Senior Member
True Car Nut
Join Date: Jan 2004
Location: Michigan
Posts: 3,978
Likes: 0
Received 0 Likes
on
0 Posts
Let me be the first to welcome you...although I won't be much help-the people with the know how will be along soon enough.
BTW, to help them out put your car info (trim level, year, etc...) in your Signature. If I didn't tell you to, someone else would have.
BTW, to help them out put your car info (trim level, year, etc...) in your Signature. If I didn't tell you to, someone else would have.
#4
Senior Member
True Car Nut
Join Date: Dec 2002
Location: Sauk Centre, MN
Posts: 5,459
Likes: 0
Received 0 Likes
on
0 Posts
If you want a 2.2" pulley on your 1996 you are going to have to have some extreme work done -I mean like probably close to $8g'* worth of mods, and that includes a new SC -the stock M90 probably is only efficient (with all the supporting mods) down to around a 2.7", and I can honestly say there are probably no more than 10 guys running that small of a pulley on a M90.
For a reasonable starter pulley for a 1996+ SSEi I'd suggest 3.5" with no supporting mods. If you have a CAI, better plugs (NGK TR55'* is a popular one), 180* thermostat, exhaust, and a complete tune-up you can run a 3.4". A 3.4" is common for beginner'* without any other mods, but 9 out of 10 of them are probably experiencing some not so pretty KR, where as with a 3.5" pulley they may not be running as much boost, but it is more efficient and they probably aren't getting much, if any, KR (Knock Retard).
And finally, to answer your question, www.Intense-Racing.com is the unofficial official mods vendor for Series II cars here on BC.
Check back in if you have any other questions. You will find a wealth of knowledge is available here on BC, and there are many who are here waiting to give good advice.
For a reasonable starter pulley for a 1996+ SSEi I'd suggest 3.5" with no supporting mods. If you have a CAI, better plugs (NGK TR55'* is a popular one), 180* thermostat, exhaust, and a complete tune-up you can run a 3.4". A 3.4" is common for beginner'* without any other mods, but 9 out of 10 of them are probably experiencing some not so pretty KR, where as with a 3.5" pulley they may not be running as much boost, but it is more efficient and they probably aren't getting much, if any, KR (Knock Retard).
And finally, to answer your question, www.Intense-Racing.com is the unofficial official mods vendor for Series II cars here on BC.
Check back in if you have any other questions. You will find a wealth of knowledge is available here on BC, and there are many who are here waiting to give good advice.
Thread
Thread Starter
Forum
Replies
Last Post
SSEimatt93
Detailing & Appearance
11
08-21-2006 07:19 PM
85bonneville
General GM Chat
2
07-02-2003 01:10 PM