2006 Equinox HVAC fan inop
07-13-2012, 07:56 PM
#1
Senior Member
True Car Nut
Thread Starter
2006 Equinox HVAC fan inop
2006 Equinox HVAC blower not blowing. Exchanged 20 amp fuse in panel under hood, and exchanged relay from passenger compartment panel and neither made a difference.
Any suggestions?
Reading on the internet, it might be the blower resistor but I am not entirely sure where that is.
Any suggestions?
Reading on the internet, it might be the blower resistor but I am not entirely sure where that is.
07-13-2012, 08:01 PM
#2
Retired
Certified Car Nut
Are you able to access the blower motor electrical connector and test for voltage?
__________________
Retired Administrator
2002 *-10 5.7 V8
2023 Jeep Rubicon Diesel
Retired Administrator
2002 *-10 5.7 V8
2023 Jeep Rubicon Diesel
07-13-2012, 08:03 PM
#3
Senior Member
True Car Nut
Thread Starter
Not easily, but the more I read the more it might be the resistor. Problem is I can't locate the resistor.
07-13-2012, 08:12 PM
#4
Retired
Certified Car Nut
Best I could find...
__________________
Retired Administrator
2002 *-10 5.7 V8
2023 Jeep Rubicon Diesel
Retired Administrator
2002 *-10 5.7 V8
2023 Jeep Rubicon Diesel
07-13-2012, 10:52 PM
#6
Junior Member
Posts like a Ricer Type-R
Join Date: Jul 2012
Location: INDY
Posts: 10
Likes: 0
Received 0 Likes
on
0 Posts
take a test light and see if power and ground is at resistor first.It is a common problem to lose power at a harness connector located on the left side below a pillar behind kick panel.Heavy red wire.the terminal grows weak due to the load it takes
Thread
Thread Starter
Forum
Replies
Last Post
AE Schaab
1992-1999
2
01-25-2005 05:07 PM