|
Power window now working
Hey all!! I'm brand new to the site. I wonder if anyone can shed some light in a problem I have with my truck. Its a 2011 GMC Sierra 1500 SLE crew cab. All the power windows work EXCEPT the pass rear. I have jumped the motor and it works fine, and I have taken the pass rear switch and swapped it out with the drivers rear switch, it works on the drivers rear and the driver rear switch then does not work on the pass rear window. Here is the funny thing........IF I get my son to hold the pass rear switch in either the up or down position, just hold it there, I can roll that window up and down from the drivers seat master switch. release the pass rear switch and neither the drivers door master OR the pass rear switches work. I have managed to identify all but one the wires on the pass rear switch. It is a blue with white tracer on it. On the pass front and drivers rear, there is constant power to this wire. I have no power to it on the pass rear. Does anyone know what this wire if for/from, and how its routed? I thought maybe it is broken somewhere further back, or maybe its supposed to get a power signal from the drivers master switch and it isn't due to a faulty master switch. Has anyone experience this same type of response with their window switches? I'm thinking that since the pass rear switch works fine on the other door, the problem is likely the master switch. Thoughts anyone.......
Thanks in advance for any info you can provide. |
Originally Posted by Jay2011
(Post 1629328)
I'm thinking that since the pass rear switch works fine on the other door, the problem is likely the master switch.
|
Well........I bit the bullet and bought a new master switch, plugger it in and.........it does the EXACT same thing as the old switch. So now I have a spare switch I guess. So another bit of info I have found out.....the rear drivers door has a 16ga wire that has power to it when the window lock is OFF and when the lock is ON, the power is cut to this wire BUT you can still operate the window from the drivers door switch. The passenger rear has the same wire,but it’s blue with white tracer. There is NO power on this wire regardless of the positions of the window lock AND I’m unable to operate the window from the drivers door switch like I could with the drivers side rear. I’ve checked fuses, they all look good, I haven’t had any luck finding any frayed or broken wires. Wondering if it could possibly be a relay in the panel on the floor to the left of the brake pedal. Would a relay in there only affect ONE window or would it affect them all. Im not sure how to troubleshoot this from here......any ideas anyone?? Thanks in advance again Jay |
For some stupid reason, the rear circuits are controlled by the BCM.......my best guess........
Have you scanned for "B" codes? This is not a simple hardwired circuit.......it uses logic circuits... A tech II scan tool would make diagnosis easy.... |
| All times are GMT -4. The time now is 01:17 PM. |
© 2024 MH Sub I, LLC dba Internet Brands