2001 GMC Jimmy
#1
Junior Member
Thread Starter
Join Date: Mar 2015
Location: Shiloh Ohio
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
2001 GMC Jimmy
I bought this with no rear brakes,After checking things out I replaced Master cylinder(YES I bench bled this)After installing I have no pressure in back or front lines Can't bleed the system,Any ideas?? THANKS
#2
Retired
What do you mean you can't bleed the system?
__________________
Retired Administrator
2002 *-10 5.7 V8
2023 Jeep Rubicon Diesel
Retired Administrator
2002 *-10 5.7 V8
2023 Jeep Rubicon Diesel
#3
Junior Member
Thread Starter
Join Date: Mar 2015
Location: Shiloh Ohio
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
What I mean is when I try and bleed the system I just get a small drip of fluid from the bleeders in front nothing in back I repeated this at least six times nothing
#4
Senior Member
Posts like a Turbo
Has your ABS light come on? Just a guess but since you've replaced the master cylinder I would surmise that the ABS modulator or pump needs bled also.
2004 Bonne SLE
1971 Chevelle SS
2004 Bonne SLE
1971 Chevelle SS
#7
Senior Member
Posts like a Turbo
Farmer, I'm shadetree at best and an old one to boot, but from what I've read it depends on what ABS modulator GM has installed in your Jimmy, apparently some of them even require a scan tool to bleed them. Maybe a real ASE mechanic like Tech II will chime in and help you out, also remember the internet is your friend and maybe you can find a procedure on the web. Good Luck!
2004 Bonne SLE
1971 Chevelle SS
2004 Bonne SLE
1971 Chevelle SS
The following users liked this post:
GunsOfNavarone (03-25-2015)
Thread
Thread Starter
Forum
Replies
Last Post