03 Yukon Denali service stability
#1
Senior Member
Posts like a 4 Banger
Thread Starter
03 Yukon Denali service stability
I recently change my passenger side hub bearing and now if I make a sharp light out of parking the light pops on or something if I drive straight for a block then the light will cone on. Could it be a faulty wire in the hub bearing or could it be a different hub now acting up.i would hate to take the truck to the dealer to get scanned and found out its the hub bearing I changed.
#4
Senior Member
True Car Nut
There are a multitude of issues that could cause the service stability light to come on. Before I bought a scanner that could read ABS codes I took my Bonneville into a transmission shop to get the codes read. Their scanners are usually capable of reading the codes and they tend to be much cheaper than the dealership.
Timken hub/bearings for your truck are available at rockauto.com for $100. You don't need to spend $200 to get the best.
Timken hub/bearings for your truck are available at rockauto.com for $100. You don't need to spend $200 to get the best.
Thread
Thread Starter
Forum
Replies
Last Post
johnnyidaho14
GMC/Chevrolet Truck/SUV
6
05-23-2015 11:31 PM