Brittle plastic around blower and air box
#1
Senior Member
Posts like a 4 Banger
Thread Starter
Join Date: Oct 2003
Location: SW Indiana
Posts: 133
Likes: 0
Received 0 Likes
on
0 Posts
Brittle plastic around blower and air box
Has anyone replaced the plastic around the air box, blower, firewall area below the maxi-fuse mouting? How many seperate pieces are needed and how much has to come apart to get everthing installed? I changed a blower motor and blower control module today and it went better than I expected. I really thought the entire plastic area would just crumble and fall off the fire wall but I was able to get things screwed together without much damage. It looks like a major job to change the blower box and install new plastic.
#7
DINOSAURUS BOOSTUS
Expert Gearhead
Originally Posted by tumbleweed
Looks like there are only three of us that have ever seen this problem. That'* odd.
I know some 95'* have it..other years have it. I don't recall ever seeing it in a 97+ though. Give search a try... I know you should find some.
#10
Guest
Posts: n/a
95-96 will all suffer this problem...
Most of the 97+ had some changes in the Downpipe and more insulation for the HVAC system cover..
94 and earlier iirc used a different cover... I almost wonder if the older cover would work on the 95....
I need to get a look at Brads 94 SSE
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote
Most of the 97+ had some changes in the Downpipe and more insulation for the HVAC system cover..
94 and earlier iirc used a different cover... I almost wonder if the older cover would work on the 95....
I need to get a look at Brads 94 SSE
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote