Where is "techino" and "Bonnevilleclub" links?
#1
Junior Member
Thread Starter
Join Date: Feb 2007
Location: Chandler, AZ
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
Where is "techino" and "Bonnevilleclub" links?
Hello - 1st off, this site has saved me tons of time and money...THANK YOU.
That said, I have not been able to find a post related to the older "Bonnevilleclub" links that are often referred to in historical posts. You click on them and they take you to a non-functional site. What am I doing wrong?
Also, often times a reference is made to look in the "Techinfo" section. I can not locate that either.
Specifically, I'm trying to locate the torque specs for the TB, UIM & LIM. I have found most of them for the UIM, but I haven't found the TB torque specs for the 3 nuts that attach it to the Plenum.
Thanks
Stu
That said, I have not been able to find a post related to the older "Bonnevilleclub" links that are often referred to in historical posts. You click on them and they take you to a non-functional site. What am I doing wrong?
Also, often times a reference is made to look in the "Techinfo" section. I can not locate that either.
Specifically, I'm trying to locate the torque specs for the TB, UIM & LIM. I have found most of them for the UIM, but I haven't found the TB torque specs for the 3 nuts that attach it to the Plenum.
Thanks
Stu
#2
Administratus Emeritus
Certified Car Nut
First, Thanx for enjoying the site. The site was reformatted to vBulletin, changed administration, and the Tech Section was lost . That said, plans are underway to rebuild it. In the meantime our search engine still brings up anything in the data base if the right keyword(*) are found. It'* a PITA, and I know but all we've got right now. We have a couple gearheads here very familiar with the 3.8 and I'm sure one or more will chime in soon. Dan? Bill? Pat?....
#3
Retired Senior Admin
Expert Gearhead
Join Date: May 2006
Location: Sheboygan Wisconsin
Posts: 29,661
Likes: 0
Received 28 Likes
on
24 Posts
There'* a tem[p area for that stuff called how to. I have a lot of write ups in there. We are working on getting teh techinfo section up again. Soo I hope. I will postes teh torques when I get home tonight, unless someone beats me to it.
Thread
Thread Starter
Forum
Replies
Last Post
Jim W
Your Ride: GM Pictures & Videos
200
02-04-2004 03:11 AM