bonneville key same as grand prix key????
#2
The 92-99 Bonneville keys have a single cut. I think all the Grand Prix'* (oldest I've seen is a 96 to current day) have a double sided cut.
I think the 2000+ Bonnies have a double sided cut.
But then you still have to make sure you're getting the right blank...even if both cars do have the double sided cut. You can verify by looking for the letter stamped on the key, near the plastic cased top.
I think the 2000+ Bonnies have a double sided cut.
But then you still have to make sure you're getting the right blank...even if both cars do have the double sided cut. You can verify by looking for the letter stamped on the key, near the plastic cased top.
#3
Senior Member
Certified GM nut
Thread Starter
Join Date: Dec 2004
Location: Port Charlotte FLORIDA
Posts: 2,077
Likes: 0
Received 0 Likes
on
0 Posts
ok let me clear up a bit. will the ignition tumber from a bonneville fit into a gp??
i have the single double cut key (for all doors and glove box) and ign.
i have the single double cut key (for all doors and glove box) and ign.
#5
Senior Member
True Car Nut
Join Date: May 2003
Location: Holt, MI & Lima, OH
Posts: 3,022
Likes: 0
Received 0 Likes
on
0 Posts
I think it was around 95 or 96 when the GP'* started getting double sided keys. I know for a fact that '93 and older got single cut, I'm just not sure the exact year they stopped it.
Shawn
Shawn
#6
I beleive they started phasing in double sided keys in 95 with the Riviera(correct me if I'm wrong) and introduced it into other car as they brought out redesigned models.
But the grooves are the same across the board. If you have a single sided key, the same balnk will work for your car as for any other single-sided GM key. Same goes for Two sided keys.
I can't think of a car co. that doesn't use a universal blank, although they can change from one generation of cars to the next.
But the grooves are the same across the board. If you have a single sided key, the same balnk will work for your car as for any other single-sided GM key. Same goes for Two sided keys.
I can't think of a car co. that doesn't use a universal blank, although they can change from one generation of cars to the next.
#7
Originally Posted by GonneVille
But the grooves are the same across the board. If you have a single sided key, the same balnk will work for your car as for any other single-sided GM key. Same goes for Two sided keys.
I can't think of a car co. that doesn't use a universal blank, although they can change from one generation of cars to the next.
I can't think of a car co. that doesn't use a universal blank, although they can change from one generation of cars to the next.
Thread
Thread Starter
Forum
Replies
Last Post
viniepooh
Buick
7
11-26-2012 10:26 AM
cballweg
Performance, Brainstorming & Tuning
9
01-28-2009 08:13 PM