Projector Lens
#1
Senior Member
Posts like a 4 Banger
Thread Starter
Projector Lens
Does anyone know if theres a projector lens that'll fit inside a 1995 Bonneville headlight assembly, I have a HID Kit and I hear its best to put the projector on with them.
#2
Senior Member
Posts like a Corvette
Join Date: Jun 2008
Location: Cleveland, OH
Posts: 1,389
Likes: 0
Received 0 Likes
on
0 Posts
its a little more work than throwing a lense in there, first your gonna need to have a spare set of housings, a set of projector housings, and then the rest of the winter if your not so good with a dremmel, bondo, and paint
I plan on doing this but heres just a little overview so you know what your getting into
I plan on doing this but heres just a little overview so you know what your getting into
#3
Senior Member
Posts like a 4 Banger
Thread Starter
Looks like a good plan, i have a sound system for sale if interested, by the way if you go to cardomain you can see more of my 95 Bonne, if u go under just the 1995 Pontiac Bonnevilles mines is like the 5th from the top, look for da_grey_goose_95. im very well skilled wit tool, have you found the lens already?
#4
Senior Member
Posts like a Corvette
Join Date: Jun 2008
Location: Cleveland, OH
Posts: 1,389
Likes: 0
Received 0 Likes
on
0 Posts
ok cool ill check it out, as for the lense i found a set for like $80, $110 shipped on Ebay, they are the lense, housing, and angel eyes for it
#5
Senior Member
Posts like a 4 Banger
Join Date: Jul 2006
Posts: 127
Likes: 0
Received 0 Likes
on
0 Posts
It'* a custom job, so I'd suggest you measure the factory housing and see what would fit inside it and if there is any room behind it. Then look for a projector that fits. Then you'll need to make sure the projector is aimed right for for vertical and horizonal before you epoxy it in.
I plan on doing this as well at some point, but getting the projectors properly mounted in the stock housings is a pretty big undertaking. But well worth it...plug and play looks cheesy compared to projectors.
I plan on doing this as well at some point, but getting the projectors properly mounted in the stock housings is a pretty big undertaking. But well worth it...plug and play looks cheesy compared to projectors.
Thread
Thread Starter
Forum
Replies
Last Post