92-95 to 96-99 Headlight switch over (planning)
#1
Senior Member
True Car Nut
Thread Starter
Join Date: Jan 2006
Location: NEBF:06,07 | NYBF:06,07 | ONBF:06,07 | CNBF:06 & more............
Posts: 8,029
Likes: 0
Received 0 Likes
on
0 Posts
92-95 to 96-99 Headlight switch over (planning)
Im looking for a Pic of the bracket that hold the Headlight Assembly to the car, Not the plastic peace that comes with most of the head lights but the Metal peace(*) that bolts to the Rad support.
-thanks
-thanks
#2
Senior Member
True Car Nut
Join Date: May 2005
Location: _Phoenix, AZ_ _WCBF '05, '06, '07 Survivor_ ____NEBF '07 Remnant___
Posts: 3,448
Likes: 0
Received 6 Likes
on
6 Posts
Not exactly pics directly of the braket itself, but you can see it in these pics of my trans cooler install. Held on by three bolts.
.
.
#4
Senior Member
True Car Nut
Join Date: May 2005
Location: _Phoenix, AZ_ _WCBF '05, '06, '07 Survivor_ ____NEBF '07 Remnant___
Posts: 3,448
Likes: 0
Received 6 Likes
on
6 Posts
Originally Posted by BillBoost37
Actually..the headlight bracket or the second part of it is laying on the ground under the headlight in that pic.
#5
DINOSAURUS BOOSTUS
Expert Gearhead
If my suspicions are right...Badnit is going to need both brackets. They will both be needed to complete the swap. And I think the fender curve is a little different for the corner light.
#6
Senior Member
True Car Nut
Join Date: May 2005
Location: _Phoenix, AZ_ _WCBF '05, '06, '07 Survivor_ ____NEBF '07 Remnant___
Posts: 3,448
Likes: 0
Received 6 Likes
on
6 Posts
Originally Posted by BillBoost37
If my suspicions are right...Badnit is going to need both brackets. They will both be needed to complete the swap. And I think the fender curve is a little different for the corner light.
#7
Senior Member
Certified Car Nut
Join Date: Oct 2003
Posts: 19,756
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by BillBoost37
If my suspicions are right...Badnit is going to need both brackets. They will both be needed to complete the swap. And I think the fender curve is a little different for the corner light.
#8
Senior Member
True Car Nut
Thread Starter
Join Date: Jan 2006
Location: NEBF:06,07 | NYBF:06,07 | ONBF:06,07 | CNBF:06 & more............
Posts: 8,029
Likes: 0
Received 0 Likes
on
0 Posts
IM going to use my current Corner lens, and put the 96-99 head lights in, I did a test fit int he yard with Geoff, it fits
The Head lights when you buy them new like i am, come with the bracket thats on the headlight as seen in Bobs pic
the metal peace thats on the car still is what i need, or what i need to make
The Head lights when you buy them new like i am, come with the bracket thats on the headlight as seen in Bobs pic
the metal peace thats on the car still is what i need, or what i need to make
#10
Senior Member
Certified Car Nut
Join Date: Oct 2003
Posts: 19,756
Likes: 0
Received 0 Likes
on
0 Posts
Ryan the way that the 96-99 HL is made....it has to have the corner light area on the bracket....that is where it gets it support...as you can see there is only 2 mounts, closest to the Rad...the other mount is where the HL bracket fits into the Fender....you simply cant cut off the Corner light part of the bracket....it will not work
and also the 92-95 corners donot match the 96-99 HL, there is a large difference between the 2
test fit all you want, but making it happen is a different story
and also the 92-95 corners donot match the 96-99 HL, there is a large difference between the 2
test fit all you want, but making it happen is a different story