GM Forum - Buick, Cadillac, Olds, GMC & Pontiac chat

GM Forum - Buick, Cadillac, Olds, GMC & Pontiac chat (https://www.gmforum.com/)
-   General GM Chat (https://www.gmforum.com/general-gm-chat-88/)
-   -   stock cupholder question. what year is it from? (https://www.gmforum.com/general-gm-chat-88/stock-cupholder-question-what-year-271184/)

88bonnsse 01-25-2008 12:27 AM

stock cupholder question. what year is it from?
 
o.k i was lucky enough to find a new un scratched or cracked cup holder in a bonneville at the yard and for some reason my 95 has the exact clips where the cup holder is supposed to go but the peices on the cup holder that are supposed to snap into the armrest are a lil bigger then the holes in my armrest.

my question is was the cup holder made only from 96 and up and wont fit my 95 se or was the cup holder made different like 92-95 and 96-99.?

i would really love it to fit. if not then i sell it on the site here to the best offer..

radomirthegreat 01-25-2008 03:02 AM

According to what I know, it's basically that the 96-99 models have just that little change to the center console. I don't know why that is, but it makes no sense and helps no one. I think it might be just that the thicker plugs don't break as easily. How did your cupholder break? There's not much to read on that discrepancy on this forum, so this thread should help spur some more interest.

willwren 01-25-2008 08:08 AM

Even 92/93 cupholders are not the same as 94/95. I believe that 94/95 are the same as 96 and newer. Without pics to see, we can't tell you anything about it.

radomirthegreat 01-25-2008 08:43 AM

Thanks, willwren! :D

I guess you had your center console replaced? I've completely taken out mine, and it'll go back in sooner or later. I had a terrible water leak this winter when my single non-functioning window decided to open. That was amazingly fun. Since most of my interior is out again, I should be able to help out with a few pics if I can find my center console and my digital camera.

thunderhand 01-25-2008 10:57 AM

the techinfo article states 92-95 are the same

GM P/N: 25639346 Cup Holder for 92-95. Part number is different (unknown at this time) for 96-99.

i just ordered one based on this info.. i hope i dont get the wrong one.

willwren 01-25-2008 11:32 AM


Originally Posted by thunderhand
the techinfo article states 92-95 are the same

GM P/N: 25639346 Cup Holder for 92-95. Part number is different (unknown at this time) for 96-99.

i just ordered one based on this info.. i hope i dont get the wrong one.

I can gaurantee you 100% without a shadow of any doubt that 92 and 93 are the same, but 95 is quite different. I expect 94 to be the same as 95. They are not easily interchangable.

But now I'm doubting even myself because it's been so long since I checked. When I get home through this stinking frozen white wasteland sometime today, I'll swap between the cars and confirm at least those two years.

88bonnsse 01-25-2008 02:07 PM


Originally Posted by willwren

Originally Posted by thunderhand
the techinfo article states 92-95 are the same

GM P/N: 25639346 Cup Holder for 92-95. Part number is different (unknown at this time) for 96-99.

i just ordered one based on this info.. i hope i dont get the wrong one.

I can gaurantee you 100% without a shadow of any doubt that 92 and 93 are the same, but 95 is quite different. I expect 94 to be the same as 95. They are not easily interchangable.

But now I'm doubting even myself because it's been so long since I checked. When I get home through this stinking frozen white wasteland sometime today, I'll swap between the cars and confirm at least those two years.

thanks man i would appericate it... i believe the cup holder i got was from a 96 se...


All times are GMT -4. The time now is 07:19 AM.


© 2024 MH Sub I, LLC dba Internet Brands