Spring build comes early
#221
-- SITE DONATOR --
True Car Nut
#222
DINOSAURUS BOOSTUS
Expert Gearhead
Since traction is tough, how about helping the car maintain it?
http://www.summitracing.com/parts/AIR-60798/
http://www.summitracing.com/parts/AIR-60798/
#224
Senior Member
Posts like a Northstar
Join Date: Feb 2009
Location: Northern Illinois
Posts: 789
Likes: 0
Received 0 Likes
on
0 Posts
#225
DINOSAURUS BOOSTUS
Expert Gearhead
Those are for Dan. You 00+ guys can't use them. Sorry, best of traction luck to ya.
I've got them on, pumped up to about the max 35psi. Plus I have the air struts pumped a little higher than normal. Between the two, the back end doesn't allow much weight transfer.
If I put it all back to stock, the front end would never gain any traction.
They even match Dan'* red scheme that he has going on.
I've got them on, pumped up to about the max 35psi. Plus I have the air struts pumped a little higher than normal. Between the two, the back end doesn't allow much weight transfer.
If I put it all back to stock, the front end would never gain any traction.
They even match Dan'* red scheme that he has going on.
#226
Retired Senior Admin
Expert Gearhead
Thread Starter
Join Date: May 2006
Location: Sheboygan Wisconsin
Posts: 29,661
Likes: 0
Received 28 Likes
on
24 Posts
New throttle body day.
Off with the old.
And on with the new.
Got it all hooked up.
Now for the LS1 MAF
Well, looks like I'm building a new cold air box. It no longer fits right.
Looks good though.
Off with the old.
And on with the new.
Got it all hooked up.
Now for the LS1 MAF
Well, looks like I'm building a new cold air box. It no longer fits right.
Looks good though.
#228
Retired Senior Admin
Expert Gearhead
Thread Starter
Join Date: May 2006
Location: Sheboygan Wisconsin
Posts: 29,661
Likes: 0
Received 28 Likes
on
24 Posts
I think I might, I'll have to move the PCM, never looked at how much that would involve.
Why must you keep adding things to my list Bill, why?
Why must you keep adding things to my list Bill, why?
#229
DINOSAURUS BOOSTUS
Expert Gearhead
You wanna be fast don't you? I'm not adding things to your lists. I'm merely helping you remember things you forgot to add to it yourself.
BTW, it fits pretty decently like this.
Quick moment with the hacksaw and the canister bucket will bolt near the ABS pump
Plus, I'm taking it easy on you. Only tossing one or two things out from time to time. I could throw out the whole elephant...
BTW, it fits pretty decently like this.
Quick moment with the hacksaw and the canister bucket will bolt near the ABS pump
Plus, I'm taking it easy on you. Only tossing one or two things out from time to time. I could throw out the whole elephant...
#230
Retired Senior Admin
Expert Gearhead
Thread Starter
Join Date: May 2006
Location: Sheboygan Wisconsin
Posts: 29,661
Likes: 0
Received 28 Likes
on
24 Posts
I'll look at doing that next week when I have off work.
After several updates, I got the MAF curve close, but still have a lot of work to do. Sitting at idle I'm at about 14.0:1 AFR, driving around about 14.2:1, so I'm running a bit rich, I'll have to tweak that down a bit. I had a lot of problems getting a WOT, but I was able to get one. Not a good one though. Tires broke loose every time I went 100% and didn't stop doing that until I hit 70. There was some KR. but it came and went and might have been linked to the tires braking loose, I did not turn off traction control. however, I was running lean at WOT, only dropping to 12.2:1 AFR, I need to get that down to 11.7:1
For now I'm going to spend my time with basic driving and try to get the MAF curve to settle in. After the weather improves a bit and the roads are clear and dry, I can get a few WOT runs in.
Ignore the 6+ KR line, that happened when parked in the shop.
After several updates, I got the MAF curve close, but still have a lot of work to do. Sitting at idle I'm at about 14.0:1 AFR, driving around about 14.2:1, so I'm running a bit rich, I'll have to tweak that down a bit. I had a lot of problems getting a WOT, but I was able to get one. Not a good one though. Tires broke loose every time I went 100% and didn't stop doing that until I hit 70. There was some KR. but it came and went and might have been linked to the tires braking loose, I did not turn off traction control. however, I was running lean at WOT, only dropping to 12.2:1 AFR, I need to get that down to 11.7:1
For now I'm going to spend my time with basic driving and try to get the MAF curve to settle in. After the weather improves a bit and the roads are clear and dry, I can get a few WOT runs in.
Ignore the 6+ KR line, that happened when parked in the shop.