Spring build comes early
#201
Retired Senior Admin
Expert Gearhead
Thread Starter
Join Date: May 2006
Location: Sheboygan Wisconsin
Posts: 29,661
Likes: 0
Received 28 Likes
on
24 Posts
I know I can get them cheep, but the adapter plates are to much, and not figured in to my budget at this time. Easy upgrade at any time.
Got the inlet at 82mm, can't do anything with the butterfly valve.
Internal MAF is gone, made a cover plate
Hole is sealed. Waiting for the JB weld to harden and then it'* polish time
Got the inlet at 82mm, can't do anything with the butterfly valve.
Internal MAF is gone, made a cover plate
Hole is sealed. Waiting for the JB weld to harden and then it'* polish time
#202
Retired Senior Admin
Expert Gearhead
Thread Starter
Join Date: May 2006
Location: Sheboygan Wisconsin
Posts: 29,661
Likes: 0
Received 28 Likes
on
24 Posts
Just need to put it together. I'll have to get that later on
So, why am I doing this instead of driving or tuning the Bonneville? Easier to show.
Been clearing snow all day. This is my winter ride.
There is a driveway in there somewhere. And it'* been plowed once already. I'm off to clear it again.
So, why am I doing this instead of driving or tuning the Bonneville? Easier to show.
Been clearing snow all day. This is my winter ride.
There is a driveway in there somewhere. And it'* been plowed once already. I'm off to clear it again.
#205
Retired Senior Admin
Expert Gearhead
Thread Starter
Join Date: May 2006
Location: Sheboygan Wisconsin
Posts: 29,661
Likes: 0
Received 28 Likes
on
24 Posts
When I went to pick up some JB weld I was walking along and I saw this, wow, something I don't have. Must have.
Throttle body is all done. I'll pick up a few hose clamps tomorrow and get it put on the car.
I've already added the LS1 MAF curve to my bin file. Once installed I'll transfer over the new bin and she should be all ready to go.
Throttle body is all done. I'll pick up a few hose clamps tomorrow and get it put on the car.
I've already added the LS1 MAF curve to my bin file. Once installed I'll transfer over the new bin and she should be all ready to go.
#208
Senior Member
Posts like a Northstar
Join Date: Feb 2009
Location: Northern Illinois
Posts: 789
Likes: 0
Received 0 Likes
on
0 Posts