muffler measurement question
#1
Senior Member
Posts like a Northstar
Thread Starter
Join Date: Apr 2006
Location: In the mitten
Posts: 675
Likes: 0
Received 0 Likes
on
0 Posts
muffler measurement question
Ok guys, this may sound weird but............I need to know the distance from the outlet of an aftermarket muffler to the bumper of the car. I need to know becasue I have some 90 deg. stainless tips lined up that are 16 inchs long and I want to know if they would fit (as in not stick out to far, or not far enough)
#3
Senior Member
Posts like a Northstar
Thread Starter
Join Date: Apr 2006
Location: In the mitten
Posts: 675
Likes: 0
Received 0 Likes
on
0 Posts
Hey Bill! But at 16 inchs long, they wont stick way out, or be to far under, will they?? Fter all they are stainless and not cheap so I wana see a little bit........
#4
Senior Member
Certified Car Nut
Join Date: Oct 2003
Posts: 19,756
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by mrbell83
Hey Bill! But at 16 inchs long, they wont stick way out, or be to far under, will they?? Fter all they are stainless and not cheap so I wana see a little bit........
#5
DINOSAURUS BOOSTUS
Expert Gearhead
Whoooooaa I think I get it.
You have tips...that are supposed to be clamped directly to the muffler and from that right angle they are only 16 inches long?
You have tips...that are supposed to be clamped directly to the muffler and from that right angle they are only 16 inches long?
#8
Senior Member
Posts like a Northstar
Thread Starter
Join Date: Apr 2006
Location: In the mitten
Posts: 675
Likes: 0
Received 0 Likes
on
0 Posts
Ok, thanks. Thats what I needed to hear. They are allot of money to be too short. But I tried to take the easy way, I thought I could just get them and clamp them onto my 20 dollar ebay magnaflow.
Thread
Thread Starter
Forum
Replies
Last Post
OLDsman105
General GM Chat
6
07-08-2005 07:01 PM