What plug gap?
#2
Senior Member
Posts like a Supercharger
Join Date: May 2003
Location: Columbus, OH
Posts: 163
Likes: 0
Received 0 Likes
on
0 Posts
.052 is what I would go with to start with.
But plug gaps are like tuning your car, every car is different. I seen some that run fine no matter where you gap them at, and other not for crap unless they're at .043
But plug gaps are like tuning your car, every car is different. I seen some that run fine no matter where you gap them at, and other not for crap unless they're at .043
#3
PopaDopaDo
True Car Nut
Thread Starter
I figured that I'd at least get a better starting point. Those backside plug might be a B* since it looks like there isn't as much room as in my wifes Olds.
#4
Senior Member
Certified GM nut
Join Date: May 2005
Location: Wickliffe, Ohio
Posts: 2,155
Likes: 0
Received 0 Likes
on
0 Posts
.060 is the stock gap. The reason people decrease their plug gap is to combat the higher pressures in the cylinder from blowing out the spark when you have turned up the boost.
I recommend you stay with the stock gap.
Ed
I recommend you stay with the stock gap.
Ed
#5
Junior Member
Posts like a Ricer Type-R
Originally Posted by 13secGTP
.052 is what I would go with to start with.
But plug gaps are like tuning your car, every car is different. I seen some that run fine no matter where you gap them at, and other not for crap unless they're at .043
But plug gaps are like tuning your car, every car is different. I seen some that run fine no matter where you gap them at, and other not for crap unless they're at .043
Stock gap of .060" is just what the Doctor ordered.
Thread
Thread Starter
Forum
Replies
Last Post
OLBlueEyesBonne
Performance, Brainstorming & Tuning
15
05-17-2004 05:33 PM