GM Forum - Buick, Cadillac, Chev, Olds, GMC & Pontiac chat

GM Forum - Buick, Cadillac, Chev, Olds, GMC & Pontiac chat (https://www.gmforum.com/)
-   General GM Chat (https://www.gmforum.com/general-gm-chat-88/)
-   -   Photoshop request (https://www.gmforum.com/general-gm-chat-88/photoshop-request-310358/)

rjolly87 07-10-2016 08:35 PM

Photoshop request
 
3 Attachment(s)
Greetings all!

I am curious about how the combination of these rims:

https://www.gmforum.com/attachment.p...ine=1468197359

Would look on this car:
https://www.gmforum.com/attachment.p...ine=1468197359
https://www.gmforum.com/attachment.p...ine=1468197359
https://scontent.fsnc1-2.fna.fbcdn.n...35&oe=5833B0CB
https://scontent.fsnc1-2.fna.fbcdn.n...7a&oe=582DAA1D

Any help is greatly appreciated!

rjolly87 07-17-2016 01:09 PM

2 Attachment(s)
I found a set of rims/tires on local craigslist, and picked them up.

Here is the IRL version of photoshop for those curious:
https://www.gmforum.com/attachment.p...ine=1468775364
https://www.gmforum.com/attachment.p...ine=1468775364

Now, I just need to find center caps, and track down my issue in the LF that is chewing tires.

rjolly87 08-28-2016 12:08 PM

Here's an update.

I tried mounting 1 wheel to the right rear, only to find out that the tire is hitting the trailing arm. Spacers would likely be needed on all 4 corners for this rim/tire combo

So, now I am not quite sure which direction to go, whether it be wheel spacers, different rims all together, or cut my losses and stay stock. I am also not sure how much spacer it would take to do the job.

The goal is to get a wider tire with a bit shorter sidewall under it so that it doesn't drive on the sidewall when I decide I want to have a little fun.

WilliamE 08-28-2016 04:55 PM

They would look great on there, but before you make a decision I'd try to find out how much space you need to clear the trailing arm.
If it is not much you can get a washer type spacer, but if it is a inch or more I'd go bolt on, and get quality spacer, don't go cheap!

Vecdid 10-16-2016 12:47 AM

Those don't too bad at all!


All times are GMT -4. The time now is 04:29 PM.