BASICS for DUMMIES :D
#1
Senior Member
Posts like a Turbo
Thread Starter
Join Date: Feb 2007
Location: Massachusetts
Posts: 204
Likes: 0
Received 0 Likes
on
0 Posts
BASICS for DUMMIES :D
Uhm, sorry to have to be stupid enough to ask this lol.
How do I get cruise control to work .
LOVE YAHS
How do I get cruise control to work .
LOVE YAHS
#3
Senior Member
True Car Nut
Join Date: Sep 2004
Location: Fitchburg Ma _ToastedRice_
Posts: 6,837
Likes: 0
Received 0 Likes
on
0 Posts
slide the switch to the right.
push button on end of lever
lift foot off of gas
pressing the brake will disengage to cruise, to resume at previous speed, press switch to the right again
push button on end of lever
lift foot off of gas
pressing the brake will disengage to cruise, to resume at previous speed, press switch to the right again
#4
Senior Member
True Car Nut
Join Date: Aug 2003
Location: Salina, KS
Posts: 5,246
Likes: 0
Received 0 Likes
on
0 Posts
The cruise control is on the blinker lever on the left hand side of the steering wheel. First, as stated above, you move the switch the "On" position, as shown here:
Then, when you are at the speed that you wish to maintain, press and hold the "Set" button on the end of the lever for about 3-5 seconds, then just remove your foot from the gas pedal:
If you'll notice on the first picture of the on/off switch, you'll see where it says "R/A". That means "Resume" and "Accelerate". If you have to slow down for any reason, just slide the button over to "R/A" and let go, and it will resume your cruise control to the same speed it was before.
If you're cruising on cruise control, and wish to go bump up the cruise speed, just slide it over to "R/A" and hold it, until you get to your desired speed, then let off. It then will cruise along at the faster speed.
Hope that helps ya!
Then, when you are at the speed that you wish to maintain, press and hold the "Set" button on the end of the lever for about 3-5 seconds, then just remove your foot from the gas pedal:
If you'll notice on the first picture of the on/off switch, you'll see where it says "R/A". That means "Resume" and "Accelerate". If you have to slow down for any reason, just slide the button over to "R/A" and let go, and it will resume your cruise control to the same speed it was before.
If you're cruising on cruise control, and wish to go bump up the cruise speed, just slide it over to "R/A" and hold it, until you get to your desired speed, then let off. It then will cruise along at the faster speed.
Hope that helps ya!
#6
Senior Member
Posts like a Camaro
Join Date: Apr 2004
Location: Sioux Falls, SD. Member #2387
Posts: 907
Likes: 0
Received 0 Likes
on
0 Posts
Another thing...
If you just push it to 'R/A' and release, it'* supposed to go up by about 1mph each time. Also, if you press 'Set' and let go (while already in cruise) it slows down by about 1mph each time.
Pretty handy if you go from a 65-70 speed zone. Just press it to 'R/A' about 5 times. Same for the 'Set' button if you go from a 70-65...
If you just push it to 'R/A' and release, it'* supposed to go up by about 1mph each time. Also, if you press 'Set' and let go (while already in cruise) it slows down by about 1mph each time.
Pretty handy if you go from a 65-70 speed zone. Just press it to 'R/A' about 5 times. Same for the 'Set' button if you go from a 70-65...
#8
Senior Member
True Car Nut
Join Date: Aug 2003
Location: Salina, KS
Posts: 5,246
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Stitch
3 - 5 seconds? :? I just push and release. Oh you have to be above 40 kmh before you can set it though
Thread
Thread Starter
Forum
Replies
Last Post
GunsOfNavarone
Lounge
4
05-29-2011 12:11 AM