door panels
07-06-2005, 07:08 AM
#2
DINOSAURUS BOOSTUS
Expert Gearhead
Yes, the door panels will cross fit each other will very minor differences.
The only differences I know of are 92-95 have two 7mm bolts by the speakers, 96-99 do not, and 92-95 have two bolts behind the door light and 96-99 have only 1.
I believe JR3800 swapped his up to the 96-99'*.
The only differences I know of are 92-95 have two 7mm bolts by the speakers, 96-99 do not, and 92-95 have two bolts behind the door light and 96-99 have only 1.
I believe JR3800 swapped his up to the 96-99'*.
07-06-2005, 08:39 AM
#3
Guest
Posts: n/a
Originally Posted by BillBost37
Yes, the door panels will cross fit each other will very minor differences.
The only differences I know of are 92-95 have two 7mm bolts by the speakers, 96-99 do not, and 92-95 have two bolts behind the door light and 96-99 have only 1.
I believe JR3800 swapped his up to the 96-99'*.
The only differences I know of are 92-95 have two 7mm bolts by the speakers, 96-99 do not, and 92-95 have two bolts behind the door light and 96-99 have only 1.
I believe JR3800 swapped his up to the 96-99'*.
If you do attempt to swap make sure you get all of the brackets that go with the pannels...
I haven't swapped all of mine... I will actually remove the one I was messing with and go back to the original pannel for a while... I just don't have enough time to do everything I want or need to, so the newer pannels will hold off for a little while...
In all actuallity I like the 96-99 pannels better... But I'll come back to those in the future..
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote
07-06-2005, 08:53 AM
#4
DINOSAURUS BOOSTUS
Expert Gearhead
JR...which brackets are you talking about? The one up by the power mirror switch (ok..where it would be...in the handle) and the one by the light?
07-06-2005, 09:14 AM
#5
Senior Member
Posts like a 4 Banger
Thread Starter
Join Date: Nov 2003
Location: St. louis
Posts: 141
Likes: 0
Received 0 Likes
on
0 Posts
Along with those issues it seems the switches fit just a little different. I may play with them awhile but not too long. Got them from the junkyard for 25 bucks, two tone grey leather.
07-06-2005, 10:01 AM
#7
Senior Member
Certified Car Nut
Join Date: Oct 2003
Posts: 19,756
Likes: 0
Received 0 Likes
on
0 Posts
the 92-95 panels are 2 different pieces, and the 96-99 are one piece. The 96-99 have Fatter switches, but that is only the plate. If you have 2 tone leather panels you got them from a 92. What you could do is use the lighter leather by the handle and that whole part on your panel, instead of swapping the whole panel
07-06-2005, 11:57 AM
#9
Senior Member
Certified Car Nut
Join Date: Oct 2003
Posts: 19,756
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by n2lght
Good idea, I'll have to take a look when I get home.
07-06-2005, 12:47 PM
#10
Guest
Posts: n/a
I should have taken a few pics...
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote
