aeroforce guage
#5
Senior Member
Posts like a Northstar
Join Date: Aug 2007
Location: Ladysmith B.C. Canada
Posts: 620
Likes: 0
Received 0 Likes
on
0 Posts
Sorry about the hijack but I was wondering if the aeroforce gauge would work at all with the OBD 1.5 since it has the newer connection and all?
#6
Senior Member
True Car Nut
Join Date: Jun 2003
Location: Purgatory
Posts: 6,313
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by JMH1950
Sorry about the hijack but I was wondering if the aeroforce gauge would work at all with the OBD 1.5 since it has the newer connection and all?
It sure is handy
#7
Junior Member
Posts like a Ricer Type-R
I've been trying to figure out (and strongly suspect it'* possible) whether the Aeroforce will work on the 94/95.
We could figure it out in advance to some extent by comparing what pins of the connector the gauge actually uses. We didn't get the chance to swap one into my SLE last year. I doubt there'* any risk to the gauge. Either worky or not.
We could figure it out in advance to some extent by comparing what pins of the connector the gauge actually uses. We didn't get the chance to swap one into my SLE last year. I doubt there'* any risk to the gauge. Either worky or not.
#8
Senior Member
True Car Nut
Join Date: Aug 2004
Location: In your garage, swipin' da lug nutz
Posts: 3,067
Likes: 0
Received 1 Like
on
1 Post
I don't think it is. My OBD2 reader (not the HP Tuner suite I bought) will not work at all with my 94. IIRC, the data lines are in different positions. Don't quote me on that though. I have NOT tried the HP Tuner scanner on the 94 yet, as I had no reason to.