supercharger silencers?
#1
Banned
Posts like a Turbo
Thread Starter
Join Date: Sep 2008
Location: cranford nj
Posts: 301
Likes: 0
Received 0 Likes
on
0 Posts
supercharger silencers?
hey, i have no idea if this is true, i cant remember where i ever herd it from but my question is that is there silencer ports on our superchargers? becasue as i said i dont know where i herd it from but if there are silencer port can they be plugged to make them sound much much louder with a louder scream when you accelerate? so 2 questions, are there silencer ports and if so can they be plugged to make it sound louder?
and if i sound like an idiot please feel free to say so
thanks
and if i sound like an idiot please feel free to say so
thanks
#2
Retired Senior Admin
Expert Gearhead
Join Date: May 2006
Location: Sheboygan Wisconsin
Posts: 29,661
Likes: 0
Received 28 Likes
on
24 Posts
Silencer ports are the angle slots.
Yes, they can be welded shut
It will only make the whine a little louder. But what it really does is give a nice whine while the engine is at idle.
Yes, they can be welded shut
It will only make the whine a little louder. But what it really does is give a nice whine while the engine is at idle.
#3
Banned
Posts like a Turbo
Thread Starter
Join Date: Sep 2008
Location: cranford nj
Posts: 301
Likes: 0
Received 0 Likes
on
0 Posts
o dam that is so sexy, i have to deff do that for the summer, thanks a bunch, ur deff the man, and sweet i just hit 102 posts, im an sse member, sweet
#4
Banned
Posts like a Turbo
Thread Starter
Join Date: Sep 2008
Location: cranford nj
Posts: 301
Likes: 0
Received 0 Likes
on
0 Posts
and welding them shut wont effect preformance, and they wont decrease the life of the supercharger? in short it wont hurt the supercharger? it will just make it sound beastie?
#7
You got the little known option too huh...gotta love that flickering driver center and compass...
I have been waiting for my charger to die to seal up them silencer ports on the new one,it has been 3 yrs waiting but ....
I swear this thing rattles like it about to blow up but I drive the hell outta this car and it sounds the same it did when I bought it for $700 ...
I have been waiting for my charger to die to seal up them silencer ports on the new one,it has been 3 yrs waiting but ....
I swear this thing rattles like it about to blow up but I drive the hell outta this car and it sounds the same it did when I bought it for $700 ...
#8
Okie Hokie
Posts like a Camaro
Join Date: Dec 2008
Location: Durant, Ok 74701
Posts: 1,107
Likes: 0
Received 0 Likes
on
0 Posts
I was tempting the idea of welding the silencers on mine when i get a chance to have it apart for a week or so, but she screams pretty loud after just putting the intake on... i drove around the block a few times and a guy a block and a half down the road turned around when i put her to the floor and looked at me with this puzzled look as i flew by... twas awesome
#9
Senior Member
True Car Nut
Join Date: Sep 2006
Location: Indianapolis, IN
Posts: 4,606
Likes: 0
Received 0 Likes
on
0 Posts
Eaton has specifications for porting the M90. The silencer slots were put in place just for silencing. Their location adds turbulence to the air going into the LIM, so plugging the slots restores about a horsepower or less of lost performance. Also, Eaton advises that you do not port the silencer slots as this increases turbulence. Just port out the triangle and close the silencer slots to get a slightly better supercharger and more whine.
#10
Okie Hokie
Posts like a Camaro
Join Date: Dec 2008
Location: Durant, Ok 74701
Posts: 1,107
Likes: 0
Received 0 Likes
on
0 Posts
anything on the M62s??? as far as specs for porting and silencers??? couple of us early birds that would be interested *wink wink* *nudge nudge*