Manifold problems......
#1
Senior Member
Certified Car Nut
Thread Starter
Join Date: Aug 2004
Location: My reclining computer chair
Posts: 11,269
Likes: 0
Received 0 Likes
on
0 Posts
Manifold problems......
Probably has been seen but,here it is again?!?!?!
[url]http://www.gmproblems.com/38.htm[url*]
[url]http://www.gmproblems.com/38.htm[url*]
#2
Senior Member
True Car Nut
Join Date: Nov 2002
Location: Texarkana, Texas
Posts: 6,042
Likes: 0
Received 0 Likes
on
0 Posts
Re: Manifold problems......
Originally Posted by dbeast420
#4
Senior Member
Certified Car Nut
It'* not a gasket issue but an EGR/Intake issue.
I really hate sites like this. The EGR/Intake should be fixed yes, but Brake rotors are a wear item on cars. They touch pads their entire life. Those Gen III v8'* sometimes have piston slap because it'* an aluminum engine, and if it'* not fully warmed up and oiled just right it'll make noise.
I really hate sites like this. The EGR/Intake should be fixed yes, but Brake rotors are a wear item on cars. They touch pads their entire life. Those Gen III v8'* sometimes have piston slap because it'* an aluminum engine, and if it'* not fully warmed up and oiled just right it'll make noise.
#5
Senior Member
True Car Nut
Join Date: Jan 2003
Location: Bloomington-Normal, IL 1997 SE
Posts: 3,734
Likes: 0
Received 0 Likes
on
0 Posts
most brake rotor problems are just due to the rotors/pads needing to be worn in, or the mechanic overtightened the rotor when he put it on and warped it.
Thread
Thread Starter
Forum
Replies
Last Post
Dahl
Classics (Star Chief and 1957 to 1986)
11
10-24-2009 09:29 PM