Center Console Rear Vents
#1
Senior Member
True Car Nut
Thread Starter
Join Date: Dec 2002
Location: Halifax, Canada 91SSE / 97SSEi
Posts: 5,857
Likes: 0
Received 0 Likes
on
0 Posts
Center Console Rear Vents
Hey all,
I just got my new vents, the ones that go in the center console for the rear passangers.
(The ones with the car had cracks in them when I bought it)
(This is my 97SSEi)
Just wondering how the console comes apart and what'* the easiest way to get in there to replace them.
Thanks
I just got my new vents, the ones that go in the center console for the rear passangers.
(The ones with the car had cracks in them when I bought it)
(This is my 97SSEi)
Just wondering how the console comes apart and what'* the easiest way to get in there to replace them.
Thanks
#2
Senior Member
True Car Nut
Join Date: Jun 2003
Location: Purgatory
Posts: 6,313
Likes: 0
Received 0 Likes
on
0 Posts
according to the manual you can pull them straight out without removing the console. They dont show much detail here. Its a bit involved if you have to remove the console, shifter removal, vent actuator etc. I'll let someone who has already removed this to comment.
#3
Senior Member
Posts like a Camaro
bud, they just pop out. just wriggle them free, one at a time. they are very easy to work with. I replaced mine with ones from a 97SSEi with tan ones. Just pull from the corner where you turn to adjust it. Pull towards you and replace the same way!!!
#4
Senior Member
True Car Nut
Thread Starter
Join Date: Dec 2002
Location: Halifax, Canada 91SSE / 97SSEi
Posts: 5,857
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by 94SSEgold
bud, they just pop out. just wriggle them free, one at a time. they are very easy to work with. I replaced mine with ones from a 97SSEi with tan ones. Just pull from the corner where you turn to adjust it. Pull towards you and replace the same way!!!
#5
Senior Member
Posts like a Camaro
man trust me, you dont wanna go there. It aint to bad but very time consuming(the console extraction)! The vents are the easiest part of the console to change. I once had to take my console lid assembly off and replace with one out that same 97SSEi so my latch would close and i would have a cup holder. That was a bugger.( Your project should take you under 6 minutes to do this!!! Good luck and let us know how it goes!!!!
Thread
Thread Starter
Forum
Replies
Last Post