Intake mod POLL
 

By far, the most common mod, and in most cases, the FIRST mod, is the intake. Here's our chance to share our various methods and post our wish lists.

I took out the stock unit to modify it I actually used a bag for all the screws ( 2) and carefully taped all the wires (1)and then placed the box about 12 feet away then I PULLED OUT MY SHOTGUN AND RIPPED IT A NEW HOLE! BOOM! Then very carefully I returned it to its original location. I haven’t had time to do anything else recently. How come that wasn’t on your list?

Ty

I didn't think anyone else was like me! 12-guage?

Yes had a sxs home made shorty ,but left it in Canada something about it being illegal in the US.

This was not a response from Ty.
I repeat Ty did not say or write this. Not sure who did though.

I really set this up for your info so you could see what everyone's done, as much as for everyone else's benefit. Might give some folks a few ideas....lotta talk about intake mods, thought it would be good to get it all in one spot.

I don't get it.. there's a few people who actually did a true CAI system but never stated what they used, and how much.. and any difficulties if any ??

see now u made me log in and tel you what i did. geeez I bought a K&N cone filter parts # 9020 i think from jegs i riped out my airbox and threw it in teh garbage and then inserted the cone filter into teh rubber ocordian thingy then i started my car up and VROOOOOOOOOOOOOM dropped 3 tenths off my 1/4 mile time same conditions. the heat has nt really made a difference because i addeda cool air duct into teh airfilter area and made a heat shield from 3 sheets of aluminum to bock some heat from teh crossover exhaust pipe. :) hth

Hello, new to the Bonnie-world, but not to CAI. I have removed stock airbox completely, and had a CAI custom made from a 3inch piece of stainless exhaust,bent to fit in the space theat the org. was in.Tipped witth a K&N 3in cone, drilled a hole to place sensor in place. Then had it powder coated, what a difference it makes. My mods are Jet 6-way chip, head-work, bottom-end freshed up, 3 in exhaust from engine back,hi-flow cat,Ultra-flow muffler, with ractive stainless tips. :lol:
92 SSE
med.met. garnet-red

Turtle, and Bose, we want DETAILED pics and parts lists.......desperately!

Have u looked at my website lately??? lol