yes

My brother'* 00 Lesabre Limited doesn't have it, but it'* got heated seats, etc..

Check the fsm to make sure the pulses per mile is the same, if it is, pull the dash, tap the wires and make sure it works before you cut the dash.

is there a DIY for this install like does not matter if its not for a sabre i just want to get a better understanding of this mod

there is nothing of the sort.....

I installed my own looking at the service manuals....
if you want to do this
you MUST be good with electrical wiring
you MUST have a FSM

ya i am going ot have to invest into a FSM is there a place i can go out and buy one not off the net or is that my only choice

Ebay has them..

To answer the question.....Yes it can be done in any GM vehicle as long as you have wiring like the 2004 newer GP'*. Mainly the single info wire that runs to everything (DIC, instument cluster, OBD II, ect.)

Here is the link that I posted about a year ago on ClubGP when I figured it out. Only problem for the Buick is finding/fabricating a dash piece to acommodate the new hardware in your dash.

http://www.clubgp.com/newforum/tm.as...de=&*=#3079686

Read it a couple times and then feel free to ask questions.

actually its easier to not have the data bus....like i said, i have installed HUD in my car and another members car also.....BillBoost also did it.....

having conventional wires is much easier, there is only 8 wires that need hooked up to get it functoning...

Rogers....your gonna want to get the HUD and the dash wiring from a Bonneville that is the same year as your car....this will make it easier for you

ok thanks for the tips guys i dont plan on doing this anytime soon but i need as much info as i can get also what parts do i need out of the bonne and what do you think i will be paying for it?