DOOR MOLDINGS 92 SSE
#3
Senior Member
Certified Car Nut
Join Date: Oct 2002
Posts: 11,308
Likes: 0
Received 0 Likes
on
0 Posts
Hans, he'* asking about the EXTERIOR door cladding.
94BONNE:
It is VERY simple.
1. Remove the two screws on the inside of the door that are holding the cladding on.
2. CAREFULLY pry out the bottom edge of the cladding working your way across.
3. CAREFULLY pry out the black strip that goes across the top edge of the cladding, working your way across. I used a flat screwdriver to help pry it out.
4. Slide the cladding up and pull out.
Reinstall in the opposite direction.
Also, please put your car(*) in your signature area so we can help you better. And please take CAPS lock off.
94BONNE:
It is VERY simple.
1. Remove the two screws on the inside of the door that are holding the cladding on.
2. CAREFULLY pry out the bottom edge of the cladding working your way across.
3. CAREFULLY pry out the black strip that goes across the top edge of the cladding, working your way across. I used a flat screwdriver to help pry it out.
4. Slide the cladding up and pull out.
Reinstall in the opposite direction.
Also, please put your car(*) in your signature area so we can help you better. And please take CAPS lock off.
#5
Senior Member
Certified Car Nut
Join Date: Oct 2002
Posts: 11,308
Likes: 0
Received 0 Likes
on
0 Posts
Please put that in your signature area.
This thread of mine may help.
http://www.bonnevilleclub.com/forum/...ic.php?t=78949
The two screws you remove are pictured on the first and second page, on the inner lip of the door.
This thread of mine may help.
http://www.bonnevilleclub.com/forum/...ic.php?t=78949
The two screws you remove are pictured on the first and second page, on the inner lip of the door.
Thread
Thread Starter
Forum
Replies
Last Post
alexcoqui
Detailing & Appearance
2
05-09-2007 12:58 PM