how many O2 sensors in a Series I?
Thread Starter
Member
Posts like a V-Tak
Joined: Jan 2003
Posts: 47
Likes: 0
From: Stevens Point, WI

when i let off the gas and coast for a while, the "service engine soon" light comes on. I recently had it serviced, but they didn't replace the O2 sensor, just plugs, wires, fuel filter, and PCV valve. I was wondering, if I get an O2 sensor, should i pick up the Bosch one? does anyone have anything good/bad to say about it?
Not sure if the O2 sensor would cause that, but do NOT get a Bosch O2 sensor. Go ACDelco if anything.
I'm sure willwren will step in to shed some light on the issue itself though.
I'm sure willwren will step in to shed some light on the issue itself though.
Thread Starter
Member
Posts like a V-Tak
Joined: Jan 2003
Posts: 47
Likes: 0
From: Stevens Point, WI

Well, my car probably needs one anyway, so at least now i know which one NOT to get and which one TO get.i can always put it in for process of elimination. you guys are alot of help. besides, for the O2 sensor, you just unscrew the sensor from the header, put the new one in with hi-temp sealant, and plug it in, right? I didn't think that an O2 swap was extremely complicated (just as hard as a spark plug swap) correct me if i am wrong, please. Thanks for the replys too!
BTW, does ProZen MotorSports have a website? I see thats where yoou obtained your intake...
BTW, does ProZen MotorSports have a website? I see thats where yoou obtained your intake...
Thread Starter
Member
Posts like a V-Tak
Joined: Jan 2003
Posts: 47
Likes: 0
From: Stevens Point, WI

Damn your fast! i looked, then edited, but you already posted. i feel like a fool. your right, i'm wrong. i was just wondering what that steel flexible tube was coming out of the front exhaust header?
Thread Starter
Member
Posts like a V-Tak
Joined: Jan 2003
Posts: 47
Likes: 0
From: Stevens Point, WI

no kidding....
when you say "check the codes" do you mean whats in -Techinfo- about running through the computer and finding out whats wrong? thats what i think, just making sure
when you say "check the codes" do you mean whats in -Techinfo- about running through the computer and finding out whats wrong? thats what i think, just making sure


