special thanks to TJ'sblackbonne
#1
Senior Member
Posts like a Camaro
Thread Starter
Join Date: Oct 2006
Location: montreal canada NEBF07 ONBF07
Posts: 987
Likes: 0
Received 0 Likes
on
0 Posts
special thanks to TJ'sblackbonne
been across the border to new york to tj garage where we made a sheild for my buick . thank him very much .its nice how everyone here its glad to help out .i think this is why the BC is so apreciated thank you
#2
Senior Member
Certified GM nut
Join Date: Dec 2002
Location: plattsburgh NY
Posts: 2,037
Likes: 0
Received 0 Likes
on
0 Posts
Hey, thats no problem. It was nice to just talk about cars and shoot the **it. Just finish up that heatsheild and put that 180 stat in and i think that will take away most of your knock. Your car is starting to come together nicely. When you are ready to do the Ported LIM, and HV3 come back down and we will do that. Maybe even ER Rockers at the same time haha .
#3
Senior Member
Certified GM nut
Join Date: Dec 2002
Location: plattsburgh NY
Posts: 2,037
Likes: 0
Received 0 Likes
on
0 Posts
Oh yea, and i like that aeroforce gauge by the way. Too bad i am not OBD2. PS- get some better tires for that buick, I will see if i can find some cheap ones for you. I was talking to my brother and i think i might know where there is some. What size were those? 215 ? 15
#5
Senior Member
Certified GM nut
Join Date: Dec 2002
Location: plattsburgh NY
Posts: 2,037
Likes: 0
Received 0 Likes
on
0 Posts
Hey i have a nice big garage (not many tools), and it is just sitting there. Anyone that wants to come use it can. If you want to find a time when i am free (pm me), and we can get together and shoot the Sh*it and make our 3800'* faster I cant do much (or should i say, I havent done much), but i am willing to help and learn. I KNOW I can do CAI'*, exhaust manifolds, Rockers, Upper and lower intakes, underdrive WP Pulley, ect. If there are instructions and you are willing towork with me, we can figure it out lol
#8
Senior Member
Posts like a Camaro
Thread Starter
Join Date: Oct 2006
Location: montreal canada NEBF07 ONBF07
Posts: 987
Likes: 0
Received 0 Likes
on
0 Posts
my stock size is 215-70 15 tj .agrazela its ok whit me as long it make it go faster.ya bill garage tj and some $ to make my buick faster and get that black bonne back on the road
#9
Junior Member
Posts like a Ricer Type-R
Originally Posted by TJ'sblackbonne
Oh yea, and i like that aeroforce gauge by the way. Too bad i am not OBD2. PS- get some better tires for that buick, I will see if i can find some cheap ones for you. I was talking to my brother and i think i might know where there is some. What size were those? 215 ? 15
#10
Senior Member
Certified GM nut
Join Date: Dec 2002
Location: plattsburgh NY
Posts: 2,037
Likes: 0
Received 0 Likes
on
0 Posts
As for agrazela comment, I am going to have him(firebuick) talked into, Ported LIM (he has it in his trunk and is going on very soon), an HV3, ER, Rockers, a 2.5 DP, and Ported Manifolds. I dont have a car to work on right now, so he is the lucky canadiate haha.
Bill, yea it is a good size garage, it is 28X60, with a front overhead door and a rear one also. A nice place to park about 5 cars and work on them
Will, really?? Do you think it would work? If so, we might have to try it out next time he is down here. If it works i am ordering one the second my trann is in. That thing is 1 nice tool.
Bill, yea it is a good size garage, it is 28X60, with a front overhead door and a rear one also. A nice place to park about 5 cars and work on them
Will, really?? Do you think it would work? If so, we might have to try it out next time he is down here. If it works i am ordering one the second my trann is in. That thing is 1 nice tool.