DRL's question
#1
Senior Member
Posts like a 4 Banger
Thread Starter
Join Date: Jul 2009
Posts: 143
Likes: 0
Received 0 Likes
on
0 Posts
DRL'* question
Hey guys,
I want to disable my DRL'* (2005 SLE), and I know there are many threads about doing this...but my question is: My car'* DRL'* are my low beams, and i understand most Bonnevilles have the High beams as DRL'*.....would this change the process at all for me to disable them?
Thanks,
Eric
I want to disable my DRL'* (2005 SLE), and I know there are many threads about doing this...but my question is: My car'* DRL'* are my low beams, and i understand most Bonnevilles have the High beams as DRL'*.....would this change the process at all for me to disable them?
Thanks,
Eric
#4
Senior Member
Posts like a 4 Banger
Thread Starter
Join Date: Jul 2009
Posts: 143
Likes: 0
Received 0 Likes
on
0 Posts
DRL'*...Updated!
Hey guys,
Well, as posted before, my car runs the low beams for the DRL'*, and i posted the question if its the same. I pulled the relay this morning, and mine only has 4 prongs....not 5 like all the others with the high beams for DRL'*. so my question is, would i instead jump the 30 prong to the 87 prong...instead of the 30 to 87a like the rest of you? I posted pictures of my relay so its easier to see what im talking about....
Thanks guys!
Eric
Well, as posted before, my car runs the low beams for the DRL'*, and i posted the question if its the same. I pulled the relay this morning, and mine only has 4 prongs....not 5 like all the others with the high beams for DRL'*. so my question is, would i instead jump the 30 prong to the 87 prong...instead of the 30 to 87a like the rest of you? I posted pictures of my relay so its easier to see what im talking about....
Thanks guys!
Eric
#5
Senior Member
True Car Nut
Join Date: Mar 2009
Location: Fort crack homie
Posts: 2,894
Likes: 0
Received 0 Likes
on
0 Posts
funny how how i turn my head and foglights on during the day and some people want no light at all lool
i wish i can help you here Eric, i re routed my DRLs from low to fogs
but good luck!!
i wish i can help you here Eric, i re routed my DRLs from low to fogs
but good luck!!
#6
Artist
True Car Nut
Hey guys,
Well, as posted before, my car runs the low beams for the DRL'*, and i posted the question if its the same. I pulled the relay this morning, and mine only has 4 prongs....not 5 like all the others with the high beams for DRL'*. so my question is, would i instead jump the 30 prong to the 87 prong...instead of the 30 to 87a like the rest of you? I posted pictures of my relay so its easier to see what im talking about....
Thanks guys!
Eric
Well, as posted before, my car runs the low beams for the DRL'*, and i posted the question if its the same. I pulled the relay this morning, and mine only has 4 prongs....not 5 like all the others with the high beams for DRL'*. so my question is, would i instead jump the 30 prong to the 87 prong...instead of the 30 to 87a like the rest of you? I posted pictures of my relay so its easier to see what im talking about....
Thanks guys!
Eric
#8
Senior Member
Posts like a 4 Banger
Thread Starter
Join Date: Jul 2009
Posts: 143
Likes: 0
Received 0 Likes
on
0 Posts
Hey guys,
I was just looking at my car further, and looking at the hole on the fuse box where the center (or fifth pin) would be located, looks to be open and not a use-able hole. What i mean, is you can obviously see contact areas in the other 4 pins where the prongs go into, but this center hole doesnt have these contact areas...
My theory is, that the 87a would be for the high beams, and the 87 would be for the low beams....but that only make sense in theory, not necessarily electrically....what do you guys think about this? I'm not very experienced in electrical circuits/fuse boxes/relays......
Thanks for continually helping me out!
Eric
I was just looking at my car further, and looking at the hole on the fuse box where the center (or fifth pin) would be located, looks to be open and not a use-able hole. What i mean, is you can obviously see contact areas in the other 4 pins where the prongs go into, but this center hole doesnt have these contact areas...
My theory is, that the 87a would be for the high beams, and the 87 would be for the low beams....but that only make sense in theory, not necessarily electrically....what do you guys think about this? I'm not very experienced in electrical circuits/fuse boxes/relays......
Thanks for continually helping me out!
Eric