Custom Air Intake
hey ..tomorrows project for me is an intake and i was wondering if 3" pvc piping would work ?? and what size cone filter i will need..or the part number if anyone has it. ..i'm gonna take off the whole airbox and everything and just have a short piece of 3" pipe connected to a cone k&n air filter. ..it's pretty simple, right?
|
I am also working on a custom intake (still in design stages). I was thinking of making mine out of EMT (Metal piping) and putting a rectangular K&N filter in a custom box at a 45* angle for maximum effect...its real complicated ill make my own post lol...
EDIT: If you use PVC try and find someone that has a heat box so you can get the cone closer to the headlight by bending the PVC that way its all one peice (joints = weight and turbulance) An electrical contractor or plumber may be able to help you out and if you use EMT try and find a bender for the same reasons. |
Try going to an exhaust shop and see if they can mandrel bend some steel pipe for you. Measure out how much you need first. I did this, cost me 18$ and change. :wink:
|
Seth? how did you attach the pipe to the TB?
|
:oops: ummm... stock accordian tube.... :shhh:
need to find a reducer :look: |
I see...gonna keep my fingers crossed for the ADTR :wink:
One day I want the District to sound something like Bills whiny 93. :roll: |
One day I want the District to sound something like Bills whiny 93. |
Well, Pete, my car may roar a bit more then yours. My exhaust is a bit more rumbly then what you have. So, with the intake it will make a HUGE differemce. Take out your resonator and add a high flow cat and we'll have the same sounding car :D
|
If you want an idea what it will sound like just grab a cone and stick it on. You'll get a good idea of the sounds it will make. It will make noise like a monster either way. :wink:
|
Good..can't wait.
At least I have the exhaust done. The out in nothing with the in (intake) |
All times are GMT -4. The time now is 07:38 PM. |
© 2024 MH Sub I, LLC dba Internet Brands