General GM Chat When starting new posts, please specify YEAR, MAKE, MODEL, ENGINE type, and whatever modifications you have made. Chat about all things GM (and related cars). Off-topic stuff should be in the Lounge, and all Model specific mechanical problems should be posted in the proper forum.

Climate Controls confusing, no blow thru instrument panel

Thread Tools
 
Search this Thread
 
Old 11-29-2009, 11:10 AM
  #1  
Member
Posts like a V-Tak
Thread Starter
 
03SLE-SteelBlue's Avatar
 
Join Date: Nov 2009
Posts: 74
Received 0 Likes on 0 Posts
03SLE-SteelBlue is on a distinguished road
Question Climate Controls confusing, no blow thru instrument panel

It'* starting to get chilly here. I've only had this '03 SLE a month and it hadn't occurred to me that I've never felt any air blowing through the dash outlets, just the defrost. So I sat there trying to make it happen. No go. Then I looked in the Owner'* Manual. It shows the expected buttons for Floor, Bi-Level, and Vent, as well as one called Defog.

My controls only have Front, Rear, Outside, Recirc, and AC - as well as Fan Hi/Lo, AUTO, and MODE. As you can see in the attached photo.

I figure the manual is for a regular SE and that the SLE'* system is more advanced.

There'* got to be a way to get heat and AC out the dash vents. Also to activate Defog mode. What is it?
Attached Thumbnails Climate Controls confusing, no blow thru instrument panel-bonny-heat-controls-2.jpg  
Old 11-29-2009, 11:27 AM
  #2  
Senior Member
True Car Nut
 
Purplehazeir's Avatar
 
Join Date: Sep 2008
Location: Arlington, WA
Posts: 7,979
Likes: 0
Received 1 Like on 1 Post
Purplehazeir is on a distinguished road
Default

Press the MODE button a few times. The display will change with the current MODE selected.

Also, each vent can be independently operated with a close or open damper. It'* the little knurled **** under each vent outlet. Try those and the MODE and see if that doesn't make things work right.
Old 11-29-2009, 02:16 PM
  #3  
Member
Posts like a V-Tak
Thread Starter
 
03SLE-SteelBlue's Avatar
 
Join Date: Nov 2009
Posts: 74
Received 0 Likes on 0 Posts
03SLE-SteelBlue is on a distinguished road
Default

DOH! I would have sworn I checked MODE and drew a blank. Now, though, stepping through it displays and activates the various blower modes. Everything works, and I diddled the vent dampers a bit. I still don't see any symbol resembling the manual'* Defog mode. Also, how do you toggle between Driver and Passenger? Finally, what'* the expected action from AUTO? The display shows Auto-Fan but what'* that?
Old 11-29-2009, 02:42 PM
  #4  
Senior Member
True Car Nut
 
Purplehazeir's Avatar
 
Join Date: Sep 2008
Location: Arlington, WA
Posts: 7,979
Likes: 0
Received 1 Like on 1 Post
Purplehazeir is on a distinguished road
Default

The Driver and Passenger controls are for heat and cooling only. To go into DEFOG, you need to press the button on the far left of your controls - it says FRONT.

AUTO will keep the preset heating and cooling that you dial in for the driver and passenger. If it'* hot out, it will add AC. If it'* cold out, it will add heat.
Old 11-29-2009, 03:43 PM
  #5  
Member
Posts like a V-Tak
Thread Starter
 
03SLE-SteelBlue's Avatar
 
Join Date: Nov 2009
Posts: 74
Received 0 Likes on 0 Posts
03SLE-SteelBlue is on a distinguished road
Default

Thanks again! I wish my manual had this info. Meanwhile, sorry to be dense, but...

The Driver and Passenger controls are for heat and cooling only.
Do you mean that you can't control Floor, Bi-Level, and Vent for each seat, only the temp? When toggling through the MODES, I kept seeing Passenger on the display. Then, I must have done something (I don't know what) which switched it to Driver. I assumed this meant one could control the modes for each seat. But other than the temperature ***** I don't see how to switch between D and P.

To go into DEFOG, you need to press the button on the far left of your controls - it says FRONT.
I've done that FRONT button but I assumed it turned Defrost on and off, not DEFOG. Are there 2 settings on the FRONT button?

AUTO will keep the preset heating and cooling that you dial in for the driver and passenger. If it'* hot out, it will add AC. If it'* cold out, it will add heat.
OK, I guess I 'get' that.
Old 11-29-2009, 04:03 PM
  #6  
Senior Member
True Car Nut
 
sawgunner's Avatar
 
Join Date: Jan 2009
Location: Dover, NH
Posts: 7,122
Likes: 0
Received 0 Likes on 0 Posts
sawgunner is on a distinguished road
Default

defog is the second button on the left and that is for mirrors and rear window and yes you can only control the temp on each side aim control is for the entire cabin area
Old 11-29-2009, 07:13 PM
  #7  
Member
Posts like a V-Tak
Thread Starter
 
03SLE-SteelBlue's Avatar
 
Join Date: Nov 2009
Posts: 74
Received 0 Likes on 0 Posts
03SLE-SteelBlue is on a distinguished road
Default

Thanks. I don't have that Defog button. See above and the picture.

>aim control is for the entire cabin area
OK, makes economic sense. But why then would I see Passenger on the Mode display?
Old 11-29-2009, 07:38 PM
  #8  
Senior Member
True Car Nut
 
sawgunner's Avatar
 
Join Date: Jan 2009
Location: Dover, NH
Posts: 7,122
Likes: 0
Received 0 Likes on 0 Posts
sawgunner is on a distinguished road
Default

yes you have the defog thats what i call the rear defroster and the reason it say passenger or driver is for the temp setting usually from the last **** adjusted on either side
Old 11-29-2009, 08:23 PM
  #9  
Member
Posts like a V-Tak
Thread Starter
 
03SLE-SteelBlue's Avatar
 
Join Date: Nov 2009
Posts: 74
Received 0 Likes on 0 Posts
03SLE-SteelBlue is on a distinguished road
Default

Thanks again. It'* all starting to make sense now...
Old 11-29-2009, 08:27 PM
  #10  
Senior Member
True Car Nut
 
sawgunner's Avatar
 
Join Date: Jan 2009
Location: Dover, NH
Posts: 7,122
Likes: 0
Received 0 Likes on 0 Posts
sawgunner is on a distinguished road
Default

ya took me quite a while to get use to that thing in mine i had the dual zone manual in my 04 silverado was much easier


Quick Reply: Climate Controls confusing, no blow thru instrument panel



All times are GMT -4. The time now is 10:49 PM.