Does anyone have this info,or know where i can find it. I did a few searches and came up with nothing.

i still have the PN # on my FE1'*........i dont know if you can get the info. come to think about it, I think that Dame posted the specs of the F41'* and the FE2'*

this should help ya

http://www.bonnevilleclub.com/forum/...40&highlight=A

the coil size is listed for FE1, FE2 and F41 halfway down Dames post

Not sure if this will help, but my suspension seems to be stiffer than any other Bonneville I've driven with FE2. jr's3800, Dame, and I have long suspected I have one of the 'higher' grades of FE2 (there were 5 grades within that class of suspension). My dimensions are as follows:

Front Sway Bar 32mm

Rear Sway Bar 21mm

Front springs 16.0mm

Rear Springs 15.0mm

yup Will your spring size is really close to the F41. The F41 has a 16.3 mm coil

Thanks for the info guys,I on the phone right now getting a price from a spring manufacturer in Surrey .BC.

Each level of suspension has many differen't spring rates.

I have a full set of springs under my bed. i don't have a set of calipers but i may run out to get some tonight...

If you bother me about it I'll measure my F41 set in the shed, It is the largest set measured so far..

A mesurement would be great,the company said they will make a 1 off set of springs,but i would need mesurements,these are the mesurements theyre asking for in the diagram

That'* gonna be tough. Our rear springs are progressive coils. The pitch varies.