best jack stand spots? pics please
#1
best jack stand spots? pics please
i posted this before but i didnt really get any good replies. last time i put my car up on jackstands, it was extremely akward. wonder if you guys could give me a hand, as im doing my first oil change on this car today.
pics help immensely. where do i place the jack stands?
pics help immensely. where do i place the jack stands?
#2
Retired
Here ya go, this should help you out some.
You will see a flange that extends downward. Place the groove of the jack into this flange.
You will see a flange that extends downward. Place the groove of the jack into this flange.
__________________
Retired Administrator
2002 *-10 5.7 V8
2023 Jeep Rubicon Diesel
Retired Administrator
2002 *-10 5.7 V8
2023 Jeep Rubicon Diesel
#4
For a jack(not the one that comes with the car, a real one), I use the jackpoint with a wood block (2x4 about 6") so that the jack doesn't mess the jack point up. For the jack stands, I put them on the subframe in the front, near the mounts. Haven't had an issue so far
#5
Senior Member
True Car Nut
Join Date: Mar 2006
Location: Virginia
Posts: 2,904
Likes: 0
Received 0 Likes
on
0 Posts
i used my floor jack on the jack points and bent them in :?
the jack points are more for a bottle jack or one like for the spare tire...but if you use a block of wodd it whould be fine, and jack stands to the sub frame
#6
jack stands to the sub frame
and between bonnevilleclub and the manual, id rather trust bonnevilleclub. also, the manual means i have to get up when someone on here might have be able to make it a lot easier with very little trouble (if its more than very little, please dont bother)
Thread
Thread Starter
Forum
Replies
Last Post
obiwanshinobi
1992-1999
4
10-13-2009 08:01 PM
Glasuan
Detailing & Appearance
7
03-03-2004 11:00 PM