Spring Project
#1
Senior Member
Posts like a Northstar
Thread Starter
Join Date: Apr 2009
Location: Indianapolis, Indiana
Posts: 699
Likes: 0
Received 0 Likes
on
0 Posts
Spring Project
So I've got a lot on my plate for this spring.
Lim Gasket Replacement
Powerlog Install
I was also thinking about upgrading the fuel injectors or at least replacing the stock ones. They look a little crummy right now. Any suggestions? Im looking for something a little better than stock but that isnt overkill for my setup.
Lim Gasket Replacement
Powerlog Install
I was also thinking about upgrading the fuel injectors or at least replacing the stock ones. They look a little crummy right now. Any suggestions? Im looking for something a little better than stock but that isnt overkill for my setup.
#2
Senior Member
True Car Nut
So I've got a lot on my plate for this spring.
Lim Gasket Replacement
Powerlog Install
I was also thinking about upgrading the fuel injectors or at least replacing the stock ones. They look a little crummy right now. Any suggestions? Im looking for something a little better than stock but that isnt overkill for my setup.
Lim Gasket Replacement
Powerlog Install
I was also thinking about upgrading the fuel injectors or at least replacing the stock ones. They look a little crummy right now. Any suggestions? Im looking for something a little better than stock but that isnt overkill for my setup.
#3
Senior Member
Posts like a Northstar
Thread Starter
Join Date: Apr 2009
Location: Indianapolis, Indiana
Posts: 699
Likes: 0
Received 0 Likes
on
0 Posts
Ok. Well what about the fuel rail itself? Would it be good to replace that, or is that usually just an aesthetic choice?
#5
Senior Member
Posts like a Northstar
Thread Starter
Join Date: Apr 2009
Location: Indianapolis, Indiana
Posts: 699
Likes: 0
Received 0 Likes
on
0 Posts
oh ok I was just making sure. I didn't know if this was a part that wore out over time, and would be beneficial to replace simply for improved functionality.
#6
Retired Senior Admin
Expert Gearhead
Join Date: May 2006
Location: Sheboygan Wisconsin
Posts: 29,661
Likes: 0
Received 28 Likes
on
24 Posts
Save your money on injectors, I'm running a 3.1" pulley and hitting 98% on stock injectors. Besides, changing injector size will required a retune. You can't just change them and go. The injector tables need to be changed. As for the rails, stock is fine. Unless you really want to dress up the engine, save your money.
#8
Retired Senior Admin
Expert Gearhead
Join Date: May 2006
Location: Sheboygan Wisconsin
Posts: 29,661
Likes: 0
Received 28 Likes
on
24 Posts
It'* about a 4 hour job, and rather easy to do. You'll need the LIM gaskets, a supercharger gasket, a throttle body gasket, 2 coolant O rings, and I suggest new coolant elbows. Might want a few extra injector O rings on hand as well.
#9
Senior Member
Posts like a Northstar
Thread Starter
Join Date: Apr 2009
Location: Indianapolis, Indiana
Posts: 699
Likes: 0
Received 0 Likes
on
0 Posts
Thats everything I had on my parts list so i guess im in good shape. Its gonna be so nice to finally have this car "finished". And by finished i mean everything will be working as it should be and I will then be able to add more power.lol
Thread
Thread Starter
Forum
Replies
Last Post