3.4 MPS
#1
Senior Member
Posts like a Corvette
Thread Starter
Join Date: Feb 2007
Location: Sanford Michigan
Posts: 1,201
Likes: 0
Received 0 Likes
on
0 Posts
3.4 MPS
What all is needed to swap a 3.4 onto our '03?
I am very likely to get a great deal on one from a friend, and am curious as to what all I will need before the install.
Obviously check for KR, but is there anything else?
Do I NEED a shorter belt?
Larger idler pulley?
Would a 3.4 meshed with a gutted stock airbox and drop in K&N be a problem?
I am very likely to get a great deal on one from a friend, and am curious as to what all I will need before the install.
Obviously check for KR, but is there anything else?
Do I NEED a shorter belt?
Larger idler pulley?
Would a 3.4 meshed with a gutted stock airbox and drop in K&N be a problem?
#3
Do whatever you can to reduce intake and exhaust restrictions as well as lower your intake air temps. It might work great in cold winter temps but when it warms up in summer you need to check for KR.
#5
Senior Member
Posts like a Corvette
Thread Starter
Join Date: Feb 2007
Location: Sanford Michigan
Posts: 1,201
Likes: 0
Received 0 Likes
on
0 Posts
I am actually not going to install the pulley untill it gets scanned. There is a chance that I can get it scanned this weekend, but we will see.
It will get a FWI this spring also.
So I do need a shorter belt then?
Thanks.
It will get a FWI this spring also.
So I do need a shorter belt then?
Thanks.
Thread
Thread Starter
Forum
Replies
Last Post
Explr1
Performance, Brainstorming & Tuning
6
04-09-2006 10:28 AM
2000SilverBullet
Performance, Brainstorming & Tuning
31
11-21-2004 10:11 PM