Belt Sizing when swapping pullies.
#1
DINOSAURUS BOOSTUS
Expert Gearhead
Thread Starter
Belt Sizing when swapping pullies.
I remember picking up a smaller belt when swapping down to a 3.4" on my Series 2
Was thinking it might be a good exercise and valuable information if we could list up the correct belt size and pulley sizes on each series of motor to be put into Techinfo for future use.
Please try to keep all discussion to zero. It is expected we will have a few areas that have more than one possibilit, let'* list them up and discuss differences in another thread.
Thanks
Was thinking it might be a good exercise and valuable information if we could list up the correct belt size and pulley sizes on each series of motor to be put into Techinfo for future use.
Please try to keep all discussion to zero. It is expected we will have a few areas that have more than one possibilit, let'* list them up and discuss differences in another thread.
Thanks
#2
Senior Member
Posts like a Corvette
Join Date: Aug 2004
Location: South Bend, IN (hometown) Indianapolis,IN (college)
Posts: 1,598
Likes: 0
Received 0 Likes
on
0 Posts
3.4" will need a gatorback 715 belt. i dont know the specific length.
the idea of runnin the stock belt and a larger tensioner wont work though. belt was hitting.
the idea of runnin the stock belt and a larger tensioner wont work though. belt was hitting.
#6
DINOSAURUS BOOSTUS
Expert Gearhead
Thread Starter
C'mon folks...
Let'* list the belt sized you used for your pulley sizes... Surely we have more than S2 owners on the site.
Let'* list the belt sized you used for your pulley sizes... Surely we have more than S2 owners on the site.
Thread
Thread Starter
Forum
Replies
Last Post
inhumantl
Performance, Brainstorming & Tuning
4
06-30-2009 04:18 PM