'03 pulley swap HELP!
05-15-2005, 01:03 AM
#2
Senior Member
True Car Nut
Join Date: May 2003
Location: Holt, MI & Lima, OH
Posts: 3,022
Likes: 0
Received 0 Likes
on
0 Posts
There isn't really more stuff in the way, just different stuff. Just look at what is in the way and move it. IIRC the AC line needs to be held off to the side a little for the tool to clear, but it can be done without removing much, it just takes some patience.
Shawn
Shawn
05-15-2005, 01:22 AM
#3
Senior Member
True Car Nut
Join Date: Jun 2003
Location: Purgatory
Posts: 6,313
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by dbtk2
There isn't really more stuff in the way, just different stuff. Just look at what is in the way and move it. IIRC the AC line needs to be held off to the side a little for the tool to clear, but it can be done without removing much, it just takes some patience.
Shawn
Shawn
btw now that the sc will be spinning faster might be a good time to change the sc fluid?
05-15-2005, 02:43 PM
#5
Senior Member
Posts like a Northstar
Join Date: Feb 2005
Location: Southern Maine
Posts: 757
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by hvactech
Got it done.....pulled the coolant reservoir out and worked around the a/c lines. Today the FWI is on the menu.
How did your car perform after your pulley change?
05-15-2005, 03:03 PM
#6
Senior Member
True Car Nut
Join Date: Jun 2003
Location: Purgatory
Posts: 6,313
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by hvactech
Got it done.....pulled the coolant reservoir out and worked around the a/c lines. Today the FWI is on the menu.
The fwi is a snap too, add some silicone to the base of the pcm tray before using the self tapping screws. Mine came loose after a few miles
05-15-2005, 11:25 PM
#7
Senior Member
Posts like a Turbo
Thread Starter
Join Date: May 2005
Location: Stockton, CA
Posts: 251
Likes: 0
Received 0 Likes
on
0 Posts
Ok....had some fun this weekend and all I can say is I'm happy to have the power and SC whine back again!
3.4 pulley (ZZP MPS), FWI, 180 stat, Autolite 104'*, AFC 2.0
Car pulls nice, around 2-3*KR (same as I saw stock BTW) so I'm happy. Rockers are waiting to go in, maybe next weekend. That should take care of those couple degrees of knock.
(oops, better go change my sig now )
3.4 pulley (ZZP MPS), FWI, 180 stat, Autolite 104'*, AFC 2.0
Car pulls nice, around 2-3*KR (same as I saw stock BTW) so I'm happy. Rockers are waiting to go in, maybe next weekend. That should take care of those couple degrees of knock.
(oops, better go change my sig now
)
Thread
Thread Starter
Forum
Replies
Last Post
Allmachtige
1992-1999
1
10-05-2006 08:31 PM
dbtk2
Performance, Brainstorming & Tuning
13
08-27-2003 11:30 AM