pulley
 

How do i fully tighten my SC pulley? I cannot figure out a way to stop it from spinning so I can tighten that nut!!

use an old belt to wrap around it with a vice grips to hold it.

wont that damage the grooves in the pulley

No

you are basically making a strap wrench out of the belt and vice grip...

http://www.northerntool.com/images/p...1501539_lg.jpg

An OLD belt. Or use an impact wrench.

Please tell us what year your car is.

impact it is, TY!! 92' SSEi

Please put that in your signature.

Should an impact be suggested?

It would appear that could damage the coupler.

If using an Impact PLEASE use caution. Using a belt could save you from potential damage.

I use a BIG Set of big channel locks and a old belt, works everything and i do it by my self 8)

then just a normal long ratchet and poof its off.