boost question
#1
Member
Posts like a V-Tak
Thread Starter
Join Date: Aug 2007
Location: tampa fl
Posts: 65
Likes: 0
Received 0 Likes
on
0 Posts
boost question
i have a question about the boost. how much hp do u get per psi of boost on a stock series 1. and how much would you get with a pulley wit about 10 psi :?:
#2
Junior Member
Posts like a Ricer Type-R
There'* no way to answer your question. Too many variables.
Boost pressure is power NOT USED. 15psi would do you no good if you can't flow it.
The proper formula is the most boost you can run and still achieve max timing.
Boost pressure is power NOT USED. 15psi would do you no good if you can't flow it.
The proper formula is the most boost you can run and still achieve max timing.
#3
DINOSAURUS BOOSTUS
Expert Gearhead
I believe if you check the Intense site, they list things in drops of pulley sizes for "typically expected" numbers. Then you would have to convert that over to yours. While the S1 and S2 are quite different.. you can probably use it as a feeler gauge on what might be.
Thread
Thread Starter
Forum
Replies
Last Post
Toddster
Trouble shooting + Test Procedures
0
03-21-2009 06:24 PM
DanCulkin
Performance, Brainstorming & Tuning
14
07-02-2007 11:02 AM
hvactech
Performance, Brainstorming & Tuning
12
05-10-2005 10:14 PM