Code 57 - Boost Control Malfunction..... UGH.
#1
Junior Member
Thread Starter
Join Date: Apr 2006
Location: Purgatory
Posts: 0
Likes: 0
Received 0 Likes
on
0 Posts
Code 57 - Boost Control Malfunction..... UGH.
Got the SES twice today, both on half throttle acceleration up a slight grade. Checked it on the Scantool, says 57 - Boost Control Malfunction. I am guessing the BCS is failing? It came on twice, both about 5 seconds each, went off about 2 seconds after I let off the gas. Let me know. Thanks!
#4
Junior Member
Thread Starter
Join Date: Apr 2006
Location: Purgatory
Posts: 0
Likes: 0
Received 0 Likes
on
0 Posts
It does act normal, I got full boost, and I got proper movement when revving at idle. I DID notice around when the SES came on, the whine made a fluttering type sound.
#6
Senior Member
Posts like a Northstar
Sounds like what happened to my '92. When my BCS failed, boost was normal but the SES light came on when letting off the accelerator at around 40 MPH or so. The BCS only takes 5 minutes to replace - 1 vacuum hose, 1 electrical connector, and 1 bolt.
#7
Senior Member
Posts like a Northstar
Join Date: Jul 2006
Location: Waukesha, Wisconsin
Posts: 547
Likes: 0
Received 0 Likes
on
0 Posts
I don't want to hijack but what if you replaced the BCS with a brand new one and tried another BCA and still get the code once in a while? What is left?
Thread
Thread Starter
Forum
Replies
Last Post
03SLE-SteelBlue
General GM Chat
2
11-14-2009 02:17 PM
Toddster
Trouble shooting + Test Procedures
0
03-21-2009 06:24 PM
97bonnevillextreme
1992-1999
4
05-08-2004 07:25 PM