2.5 Pulley
01-24-2005, 11:27 PM
#1
Senior Member
True Car Nut
Thread Starter
Join Date: Sep 2004
Location: Farmington, Minnesota =MWBF '05 SURVIVOR= =CEBF '06 SURVIVOR= =August '06 COTM=
Posts: 9,130
Likes: 0
Received 0 Likes
on
0 Posts
2.5 Pulley
I'm gonna order a 2.5 pulley tonight from Pulley Boys, but before I do I wanna know if I can buy a stock belt for 92-93 (if the belts are different size from 93-95) or if I need to get the over sized idler? I'm gonna replace the belts either way because the car needs them bad.
Thanks
Nate
Thanks
Nate
01-24-2005, 11:29 PM
#2
BANNED
Join Date: Mar 2004
Location: Purgatory
Posts: 0
Likes: 0
Received 0 Likes
on
0 Posts
01-24-2005, 11:36 PM
#4
Junior Member
Posts like a Ricer Type-R
I agree 100%. The above advice is REQUIRED for 92/93 SSEi'* to achieve sufficient belt wrap around the dinky 2.2" pulley, and STRONLY suggested for the 94/95 going to the 2.5". There will be no belt slip at higher rpm'* with this setup. And you keep the stock length.
01-24-2005, 11:37 PM
#5
Senior Member
True Car Nut
Thread Starter
Join Date: Sep 2004
Location: Farmington, Minnesota =MWBF '05 SURVIVOR= =CEBF '06 SURVIVOR= =August '06 COTM=
Posts: 9,130
Likes: 0
Received 0 Likes
on
0 Posts
Thanks a lot guys....Ordering the pulley tensioner and gator back RIGHT NOW!! WOOT!
Thread
Thread Starter
Forum
Replies
Last Post
Allmachtige
1992-1999
1
10-05-2006 08:31 PM
dbtk2
Performance, Brainstorming & Tuning
13
08-27-2003 11:30 AM