how much supercharger oil????
#1
Senior Member
Posts like a Camaro
Thread Starter
Join Date: May 2004
Location: Columbia, MO
Posts: 963
Likes: 0
Received 0 Likes
on
0 Posts
how much supercharger oil????
I was filling up my M62 tonight and it only took about a bottle and a half of the supercharger oil, or about 6 oz..........is this right, I thought it took at least 8
After topping it off I turned the pulley by hand to let it air out all the bubbles, I did this a few times untill it stopped doing it. The SC was bone dry after I took it apart cleaned everything inside and out and replaced the coupler...has been sitting for about 3 months w/o any oil.....did I screw something up here?
My M90 took both bottles when I filled it up, and it wasnt bone dry!
After topping it off I turned the pulley by hand to let it air out all the bubbles, I did this a few times untill it stopped doing it. The SC was bone dry after I took it apart cleaned everything inside and out and replaced the coupler...has been sitting for about 3 months w/o any oil.....did I screw something up here?
My M90 took both bottles when I filled it up, and it wasnt bone dry!
#4
Junior Member
Posts like a Ricer Type-R
You did use the new stuff that just came out, right? Part number 34552987?
The other stuff was BAD news for the last year'* production and had to be replaced. It eats seals and bearings.
kidding.
You're good.
#5
Senior Member
True Car Nut
Join Date: May 2003
Location: Lethbridge, Alberta, _______Canada._______ West Coast Bonneville Fest ___05,06,07 Survivor___
Posts: 8,135
Likes: 0
Received 0 Likes
on
0 Posts
Bill...your gunna give someone a heart attack.
Ps. mine only took 1 bottle to fill, but then again its hard to see how much is in there, it looked and appeared to be at the bottom of the threading..
Ps. mine only took 1 bottle to fill, but then again its hard to see how much is in there, it looked and appeared to be at the bottom of the threading..
#6
DINOSAURUS BOOSTUS
Expert Gearhead
Originally Posted by willwren
You did use the new stuff that just came out, right? Part number 34552987?
The other stuff was BAD news for the last year'* production and had to be replaced. It eats seals and bearings.
kidding.
You're good.
#7
Senior Member
Posts like a Camaro
Thread Starter
Join Date: May 2004
Location: Columbia, MO
Posts: 963
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by willwren
You did use the new stuff that just came out, right? Part number 34552987?
The other stuff was BAD news for the last year'* production and had to be replaced. It eats seals and bearings.
kidding.
You're good.
#8
Senior Member
Posts like a Northstar
Join Date: Feb 2005
Location: Southern Maine
Posts: 757
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by willwren
You did use the new stuff that just came out, right? Part number 34552987?
The other stuff was BAD news for the last year'* production and had to be replaced. It eats seals and bearings.
kidding.
You're good.
Good one.
#9
Senior Member
Posts like a Supercharger
Join Date: Sep 2004
Location: Ontario
Posts: 179
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Paul
Originally Posted by willwren
You did use the new stuff that just came out, right? Part number 34552987?
The other stuff was BAD news for the last year'* production and had to be replaced. It eats seals and bearings.
kidding.
You're good.
Good one.
Thread
Thread Starter
Forum
Replies
Last Post