Goodyear Gatorback Part Numbers
#1
Senior Member
Posts like a Northstar
Thread Starter
Join Date: Mar 2003
Location: Brewerton NY
Posts: 551
Likes: 0
Received 0 Likes
on
0 Posts
Goodyear Gatorback Part Numbers
Here are the Part Numbers for the Goodyear Gatorback Drive belts for Series II 3800s for the Bonneville.
Accessory Belt (A/C, Power Steering, etc...) 4060940-$35 @ Autozone
Supercharger Belt-(when Using the stock 3.8" pulley)-4060725-$22 @ Autozone
Supercharger Belt-(When using SLP 3.4" pulley, has to be special ordered, takes 3 days)-4060715-$16 @ Autozone
Hope this helps.
Jay
Accessory Belt (A/C, Power Steering, etc...) 4060940-$35 @ Autozone
Supercharger Belt-(when Using the stock 3.8" pulley)-4060725-$22 @ Autozone
Supercharger Belt-(When using SLP 3.4" pulley, has to be special ordered, takes 3 days)-4060715-$16 @ Autozone
Hope this helps.
Jay
#3
Senior Member
Posts like a Northstar
Thread Starter
Join Date: Mar 2003
Location: Brewerton NY
Posts: 551
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Drifter420
another info of timbit that should go into techinfo..
Thanx
P.*.
I'm assuming that'* for the stock stuff ( i.e. original 3.8 pulley ) ?
Thanx
P.*.
I'm assuming that'* for the stock stuff ( i.e. original 3.8 pulley ) ?
#4
Senior Member
True Car Nut
Join Date: May 2003
Location: Holt, MI & Lima, OH
Posts: 3,022
Likes: 0
Received 0 Likes
on
0 Posts
Stock pulley, I am going to be putting on the 3.4 in a few days, seems like there is enough travel in the tensioner for the 3.4. I'll let you know. The GP guys use the stock size, so I think it will be OK!
Accessory Belt (A/C, Power Steering, etc...) 4060940-$35 @ Autozone
Supercharger Belt-4060725-$22 @ Autozone
Supercharger Belt-4060725-$22 @ Autozone
If you have a 3.4 Pulley (or smaller), then a 4060715 belt will fit the supercharger.
#5
Senior Member
Posts like a Northstar
Thread Starter
Join Date: Mar 2003
Location: Brewerton NY
Posts: 551
Likes: 0
Received 0 Likes
on
0 Posts
[quote="dbtk2"]
The Supercharger belt is correct, but the accessory belt that you listed is too big. The stock accessory belt size is a 4060922. That would be 1.8 inches shorter than the one you listed. (92.2 inches as opposed to 94 inches) If you have a 3.4 Pulley (or smaller), then a 4060715 belt will fit.
I measured it up to the stock belt and they were the same size, it seems to work fine. The belt package even had my 3.8L diagram on the back. :?:
The Supercharger belt is correct, but the accessory belt that you listed is too big. The stock accessory belt size is a 4060922. That would be 1.8 inches shorter than the one you listed. (92.2 inches as opposed to 94 inches) If you have a 3.4 Pulley (or smaller), then a 4060715 belt will fit.
#6
Senior Member
True Car Nut
Join Date: May 2003
Location: Holt, MI & Lima, OH
Posts: 3,022
Likes: 0
Received 0 Likes
on
0 Posts
I measured it up to the stock belt and they were the same size, it seems to work fine. The belt package even had my 3.8L diagram on the back.
Go to http://www.goodyearbeltsandhose.com/ then click on select a product on the top, and choose the vehicle. It gives you belt numbers for basically any car you want.
#7
Junior Member
Posts like a Ricer Type-R
For the price of the ZZP tensioner, I strongly suggest you use it. It'* more critical for my itty bitty 2.2" pulley, as the stock belt length didn't give enough belt wrap.
Thread
Thread Starter
Forum
Replies
Last Post