SC Pulley
06-17-2003, 07:08 PM
#1
Junior Member
Posts like a Ricer Type-R
Thread Starter
Join Date: Oct 2002
Posts: 22
Likes: 0
Received 0 Likes
on
0 Posts
SC Pulley
I have a 92 which has a stock 2.5" pulley. How small should I go? Should I go as low as 2.2". Has anyone had any problems running a smaller pulley?? I am just afraid of damaging something. thanks
06-18-2003, 03:26 AM
#3
Junior Member
Posts like a Ricer Type-R
There'* some stuff in the works with Pulley Boys on this. Hold tight while it get sorted out. Brian or Myself will post when the time is right!
If you're DESPERATE, go with nothing smaller than a 2.2 for the time being, especially without a modded exhaust and intake. If you're not running the 180 stat and extra tranny cooler, don't change anything.
If you're DESPERATE, go with nothing smaller than a 2.2 for the time being, especially without a modded exhaust and intake. If you're not running the 180 stat and extra tranny cooler, don't change anything.
Thread
Thread Starter
Forum
Replies
Last Post
Allmachtige
1992-1999
1
10-05-2006 08:31 PM
dbtk2
Performance, Brainstorming & Tuning
13
08-27-2003 11:30 AM