how hard is it to chg bulb for ABS light
11-21-2006, 08:10 PM
#1
Senior Member
Posts like a Turbo
Thread Starter
Join Date: Dec 2004
Posts: 303
Likes: 0
Received 0 Likes
on
0 Posts
how hard is it to chg bulb for ABS light
my ABS light does NOT come on anymore when turning the key on. This is ever since I chgd my shorted out ignition switch. I figured it it probably burned out the bulb, how hard is it to chg ? 
11-21-2006, 08:24 PM
#2
Senior Member
Certified Car Nut
Join Date: Oct 2003
Posts: 19,756
Likes: 0
Received 0 Likes
on
0 Posts
remove the headlight **** by pushing on the metal tab that is located on the back of the **** to release it off the shaft
remove the trim panel with the T15 bolts that goes around the Twilight sentinal and the cig lighter
remove the trim that goes around the radio
remove the T15 bolts that hold in the cluster
unclip the connector at the back of the cluster
replace bulb with a PC194
reverse for reinstallation
remove the trim panel with the T15 bolts that goes around the Twilight sentinal and the cig lighter
remove the trim that goes around the radio
remove the T15 bolts that hold in the cluster
unclip the connector at the back of the cluster
replace bulb with a PC194
reverse for reinstallation
Thread
Thread Starter
Forum
Replies
Last Post