Problems Programming Key Fob
#1
Okie Hokie
Posts like a Camaro
Thread Starter
Join Date: Dec 2008
Location: Durant, Ok 74701
Posts: 1,107
Likes: 0
Received 0 Likes
on
0 Posts
Problems Programming Key Fob
https://www.gmforum.com/t278901/
Attempted programming an old key fob for a gm something... lol not the right number for the bonnie but thats not my interest
I was reading that on some cars when jumpering the plug you need a FUSED wire... is that so with the 94s & 95s? i only ask because the step where it locks/unlocks the doors to let you kno its ready... never happened and i know its got the transmitter... at least its suppose to according to the vin
Attempted programming an old key fob for a gm something... lol not the right number for the bonnie but thats not my interest
I was reading that on some cars when jumpering the plug you need a FUSED wire... is that so with the 94s & 95s? i only ask because the step where it locks/unlocks the doors to let you kno its ready... never happened and i know its got the transmitter... at least its suppose to according to the vin
#2
Retired Senior Admin
Expert Gearhead
Join Date: May 2006
Location: Sheboygan Wisconsin
Posts: 29,661
Likes: 0
Received 28 Likes
on
24 Posts
The fused wire is just to prevent a dead short. It shouldn't effect the programing. Can you tell if you have a wire going to ports 1 and 4? Also, make sure you got the right ports. They are small and it'* a bit cramped.
#5
Okie Hokie
Posts like a Camaro
Thread Starter
Join Date: Dec 2008
Location: Durant, Ok 74701
Posts: 1,107
Likes: 0
Received 0 Likes
on
0 Posts
Ill wait for him to get here and for myself to get off work before playing but are you thinking id need to jumper 4 to 8 to set it???
#7
I had the same problem the first time I reprogrammed a remote for my 95 SSE.
There ended up being no problem but me.
I'm like why is there no pin in #1 but then I realized I was looking at the pin out up side down.
Take another look...lol
Not saying thats your problem but hey no one ever said we're perfect.
There ended up being no problem but me.
I'm like why is there no pin in #1 but then I realized I was looking at the pin out up side down.
Take another look...lol
Not saying thats your problem but hey no one ever said we're perfect.
Last edited by Toddster; 01-26-2009 at 06:27 PM.
#8
Okie Hokie
Posts like a Camaro
Thread Starter
Join Date: Dec 2008
Location: Durant, Ok 74701
Posts: 1,107
Likes: 0
Received 0 Likes
on
0 Posts
lol its ok... 94s are different i guess... or maybe its just mine...
i tried 4 to 8 and boom... lock/unlock and it was ready... now i just gotta wait til the fob comes in and cross my fingers
will post when i get it to work, or with futher problems lol
i tried 4 to 8 and boom... lock/unlock and it was ready... now i just gotta wait til the fob comes in and cross my fingers
will post when i get it to work, or with futher problems lol