how do i take this thing apart i know i take out the screw and all that but what about the ones that look glued down? what do i do about those, what kind of glue do i use to glue them back down, and is there anything else is should know about this? aslo what kind of bulbs do i use as replacements

The driver information center does not have bulbs - it uses a vacuum-tube flourescent display. We need more detail on the problem.

my service engine soon light wont work. what could the problem be, and could i switch these lights out of maybe the volt warning or anything like that to fix it

OK, follow this procedure in Techinfo - There should be no glue involved, however, you must be very careful when taking it apart.

http://www.bonnevilleclub.com/techinfo/?article=56

where would i get a replacement bulb for this

The dealer for sure, maybe autozone. That'* the procedure I was telling you about yesterday. Just be careful when taking it apart. Remember where everything went.

Wow.... I suppose this would be similar for a 87-91... that'* good to know it can be repaired.... because I'm sure you can't order it anymore.

Your best bet would be to pull the bulb out that you want to replace, and then take it over to Autozone. If they don't have it, hopefully the dealer will.

thats what im gunna do it says 70 and 9 or 6 what do those numbers mean

Not sure - Take it to the store to see if you can find a similar one.