94 program keyless remote - help for friend
#1
Senior Member
Certified Car Nut
Thread Starter
Join Date: Oct 2002
Posts: 11,308
Likes: 0
Received 0 Likes
on
0 Posts
94 program keyless remote - help for friend
My friend needs to program his keyless remote for his 94. I read techinfo. Call me stupid but what is a "fused jumper" and where are these pins I'm supposed to connect? Thanks!
EDIT: I take it the pins are for the connector under the dash.
EDIT: I take it the pins are for the connector under the dash.
#2
Senior Member
Certified Car Nut
Join Date: Oct 2003
Posts: 19,756
Likes: 0
Received 0 Likes
on
0 Posts
fused jumper is something like wire where you connect the 2 pins together...its a good idea to have it fused just in case
the pins are in the DLC....(where the scantool plugs in) under the dash above the drivers side foot well
the pins are in the DLC....(where the scantool plugs in) under the dash above the drivers side foot well
#3
Senior Member
Certified Car Nut
Thread Starter
Join Date: Oct 2002
Posts: 11,308
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by 1993 SLE
fused jumper is something like wire where you connect the 2 pins together...its a good idea to have it fused just in case
the pins are in the DLC....(where the scantool plugs in) under the dash above the drivers side foot well
the pins are in the DLC....(where the scantool plugs in) under the dash above the drivers side foot well
I'm guessing the 3" wire mentioned is in place of the jumper? But it says to use a jumper anyway...that'* why they seemed confusing.
#5
Senior Member
Certified Car Nut
Thread Starter
Join Date: Oct 2002
Posts: 11,308
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by JimmyFloyd
I take it he got the remote then?
I would go out and get this fuser but Bingo is flooded from what I hear. Hopefully I won't get stuck here, I need to drive 3 hours home.
#6
Junior Member
Posts like a Ricer Type-R
I've never personally used a fused jumper. Just a wire. Once or twice, I actually just had driverjohn put his tounge on my ALDL connector and that worked too.
Thread
Thread Starter
Forum
Replies
Last Post
tobby
Bonneville GXP/ Northstar Powered Cars
11
08-10-2005 12:35 PM