Short in Passenger Fuse panel for Fuel Pump NEED 1992FSM
#11
Senior Member
Certified GM nut
Join Date: Oct 2005
Location: Western New York
Posts: 1,942
Likes: 0
Received 0 Likes
on
0 Posts
Good work tracking that down. Another member might be having the same problem. I need to see if the '97 sending units are wired the same way.
#13
Member
Posts like a V-Tak
Thread Starter
Wilren,
I had continuity between 2 terminals in the Oil Pressure Sending Unit... Everything else seemed good. I followed as much of the wires as I could. I still have an odd miss and stumble under acceleration... MAJOR stumble. Then it seems to clear itself up until it does it again... weird. BUT, the car is at least running!! another Bonnie back on the road!
Thanks again!
I had continuity between 2 terminals in the Oil Pressure Sending Unit... Everything else seemed good. I followed as much of the wires as I could. I still have an odd miss and stumble under acceleration... MAJOR stumble. Then it seems to clear itself up until it does it again... weird. BUT, the car is at least running!! another Bonnie back on the road!
Thanks again!
Thread
Thread Starter
Forum
Replies
Last Post