parking light wire for angel eyes 2000+
#1
Senior Member
Posts like a Turbo
Thread Starter
Join Date: Mar 2007
Posts: 279
Likes: 0
Received 0 Likes
on
0 Posts
parking light wire for angel eyes 2000+
hey
im gonna go out sunday and buy the angel eyes for the 2001 SE
for the led ring instead of installing a seperate switch i wanna connect it to the parking lamps....where to i slice into for the "parking light" wire. I have been told its purple wire? would this be located in that connecter that attaches the headlamp lights to the wiring harness ... i.e if i unplug this particualar harness, the headlamp is detached from the car. is this the wire??
OH, if the bulb in the AE dies, can i just go to a pepboys and replace with the Silvistar H3 bulb? :?:
pictures are helpful for me, its just how i learn.
thanks
im gonna go out sunday and buy the angel eyes for the 2001 SE
for the led ring instead of installing a seperate switch i wanna connect it to the parking lamps....where to i slice into for the "parking light" wire. I have been told its purple wire? would this be located in that connecter that attaches the headlamp lights to the wiring harness ... i.e if i unplug this particualar harness, the headlamp is detached from the car. is this the wire??
OH, if the bulb in the AE dies, can i just go to a pepboys and replace with the Silvistar H3 bulb? :?:
pictures are helpful for me, its just how i learn.
thanks
#2
Senior Member
True Car Nut
Join Date: Oct 2002
Location: Groton, CT _NEBF 05, 06, 07_
Posts: 2,703
Likes: 0
Received 0 Likes
on
0 Posts
Re: parking light wire for angel eyes
Originally Posted by ptrfair
the "parking light" wire. I have been told its purple wire? would this be located in that connecter that attaches the headlamp lights to the wiring harness ...
#3
Senior Member
Posts like a Camaro
Join Date: Jan 2004
Location: Aurora, Illinois
Posts: 922
Likes: 0
Received 0 Likes
on
0 Posts
I just did mine yesterday. Drivers side was a purple wire, the one on the passenger side was a brown wire with a white stripe. I'm loving mine. I actually rigged up some harnesses using the sockets from my old bulbs so i didn't have to cut into the factory wiring. I took pictures of the whole process but im heading out the door right now and i will post it later.
#5
Senior Member
Posts like a Camaro
Join Date: Jan 2004
Location: Aurora, Illinois
Posts: 922
Likes: 0
Received 0 Likes
on
0 Posts
Answering your question from your other post, you don't have to find the negative wire for the parking lights. I cut the bullet connector off the negative for the LED halo then wired the negative to the negative for the fog. Works fine.
Thread
Thread Starter
Forum
Replies
Last Post
ptrfair
Audio (and aftermarket electronics)
2
04-30-2007 05:59 AM
ELMACHOGERACHO
Everything Electrical & Electronic
1
10-26-2005 05:44 PM